Rocketjunkie
Addicted to APCP
- Joined
- Jan 19, 2009
- Messages
- 5,546
- Reaction score
- 1,939
Warp 9 reloads and delays. The reason for the requirement for electronic ejection is sometimes the delay element goes out at propellant burnout. If relying on motor ejection it will fail. It's the sudden drop of pressure at burnout that causes the delay grain to snuff out. I had Vulcan make me some G500s and the delay would do this in the shorter delays (-4 and some -7s) . The longer delays (-10 and -15) were reliable.