stealth6
insert witty tagline here
Djouka (scratch built) 4” x 47”----
Short, fat, squat goodness. 4" FWFG construction, 54mm motor mount, setup for redundant altimeters, GPS, etc. AV bay is optimized to fit a lot in a small space, with the aft bulkhead recessed to allow the largest possible motor in such a short airframe. "Homemade HEDend" mains deployment, drogueless apogee.
This has not been flown yet!! It's about 98.7 percent completed, and just needs a tiny bit of tweaking to be ready to fly. Build quality is excellent, and everything is "like new". Unpainted, and you could probably leave it that way if you want as it looks great as is (I was going to paint it though).
Can include a RockSim file. It's pretty good, but has not been finalized/adjusted for actual finished weight/mass and such. A lot of folks probably don't even do this anyway, and it will likely give you good sim results as is. But if you're like me, you can tweak and optimize the final bits and get more accurate sims if you wish.
It's built to fly on I/J motors between 2600' and 5000' roughly.
Included:
Kevlar harnesses, nomex blankets, rail buttons, stainless steel quicklinks, 54mm Aeropack retainer body.
Note that the AV bay also includes sled, wiring, rails, terminal blocks, charge wells, switches, hardware, battery holders, etc.
NOT INCLUDED (but "goes with this rocket" and can be bought as an option):
68" custom parachute (thin mil ripstop, similar to Rocketman)..........$30
54mm Aeropack retainer cap.............sold
RRC3 altimeter..................sold
RRC2+ altimeter (for backup)...............sold
BRB 70cm GPS tracker......................sold
Asking price..........$200 SOLD!
Short, fat, squat goodness. 4" FWFG construction, 54mm motor mount, setup for redundant altimeters, GPS, etc. AV bay is optimized to fit a lot in a small space, with the aft bulkhead recessed to allow the largest possible motor in such a short airframe. "Homemade HEDend" mains deployment, drogueless apogee.
This has not been flown yet!! It's about 98.7 percent completed, and just needs a tiny bit of tweaking to be ready to fly. Build quality is excellent, and everything is "like new". Unpainted, and you could probably leave it that way if you want as it looks great as is (I was going to paint it though).
Can include a RockSim file. It's pretty good, but has not been finalized/adjusted for actual finished weight/mass and such. A lot of folks probably don't even do this anyway, and it will likely give you good sim results as is. But if you're like me, you can tweak and optimize the final bits and get more accurate sims if you wish.
It's built to fly on I/J motors between 2600' and 5000' roughly.
Included:
Kevlar harnesses, nomex blankets, rail buttons, stainless steel quicklinks, 54mm Aeropack retainer body.
Note that the AV bay also includes sled, wiring, rails, terminal blocks, charge wells, switches, hardware, battery holders, etc.
NOT INCLUDED (but "goes with this rocket" and can be bought as an option):
68" custom parachute (thin mil ripstop, similar to Rocketman)..........$30
54mm Aeropack retainer cap.............sold
RRC3 altimeter..................sold
RRC2+ altimeter (for backup)...............sold
BRB 70cm GPS tracker......................sold
Asking price..........$200 SOLD!
Last edited: