Stealth6 is Selling Out! BIG Sale!!

[stealth6]

Nose Cones ----

4” x 16”….ogive, molded plastic, (thin shoulder?), does have small hole cut into the “bulkhead” section of the shoulder, otherwise in “like new” condition……………………………………asking $10 SOLD!

3” x 13”…..ogive, heavy duty molded plastic, excellent condition…………………………..asking $8 SOLD!

3” x 12.5”……ogive, FWFG with metal tip, black w/red shoulder (unglued), NEW………….asking $24 SOLD!

3” x 11.5”……..ogive, molded plastic, has AV built into it with Featherweight Power Perch, and an adjustable nose weight setup, black painted, good to very good condition………………………asking $28

2.6” x 9”……ogive, molded plastic, has bulkhead/eyebolt installed, red painted, good condition. ……asking $6 SOLD!

2.6” x 9”……ogive, molded plastic, LPR?, painted purple, excellent condition………………..asking $7 SOLD!

54mm x 9. 5” …….ogive, molded plastic, NEW…………………asking $7 SOLD!

54mm x 9” …….ogive, injected polycarbonate, NEW…………………asking $12 SOLD!

54mm x 13” …….Von Karmann, FWFG, unglued shoulder, white, NEW……..…asking $18 ea. (2 1 available) SOLD!

38mm x 9.5” …….Von Karmann, FWFG, unglued shoulder, white, NEW……..…asking $14 SOLD!

38mm x 9” …….conical, FWFG, unglued shoulder, white, NEW……..…asking $14 SOLD!

38mm x 7.5” …….ogive, FWFG, unglued shoulder, white, NEW……..…asking $14 SOLD!

38mm x 9” …….molded fiberglass/composite (very light), ogive, black, NEW……..…asking $12 SOLD!

38mm x 9” …….ogive, injected polycarbonate, NEW…………………asking $10 SOLD!

38mm x 7.5” …….ogive, Landru 3D printed “Smart Cone”, grey, NEW…………………asking $8 SOLD!

“29mm” x 7”……..ogive, molded FG, made to fit Hawk Mtn. “29mm” airframe, NEW………asking $8 SOLD!

2.6” 4:1 plastic, with tip cut off, great for a tailcone or interstage coupler…………………..asking $3

Whole bunch of miscellaneous LPR cones, some plastic, some balsa, most new or in perfect condition, various sizes (generally 13mm to 24 mm), there are more than shown in the pic………$5 for the lot. SOLD!

 

[stealth6]

Motor Retention (most are fairly used and/or takeoffs, but all in good working condition) ----

AeroPack…………………………

54mm threaded cap………………………………..$9 ea (2 available) SOLD!
38mm threaded cap…………………………………$8 ea (1 available) SOLD!
29mm threaded cap………………………………..$7 ea (3 available) SOLD!
29mm body…………………………………………$8 ea (2 available) SOLD!

SlimLine……………………………..

38mm threaded/toolless ring………………………….$8 SOLD!
29mm threaded/toolless ring………………………….$7 ea (2 1 available) SOLD!
29mm threaded ring……………………………………$6 SOLD!

Other………………………………………..

Aerotech 29mm threaded cap………………………..$5 SOLD!
Estes 29mm complete set (body and cap)…NEW……………..$3 ea. (2 available) SOLD!
Estes 29mm threaded cap……………………………………$2
Rocketarium 24mm body………………………………..$5 ea (3 1available) SOLD!
Rocketarium 24mm threaded cap……………………$4 ea (4 1 available) SOLD!

 

[stealth6]

Tracking....

Kenwood THD72a radio, with charger, antenna, etc. EXCELLENT condition……………..asking $240 SOLD!

BRB900 GPS, full system, includes transmitter, LiPo batteries, receiver with LED screen, “rubber duck” antennas, USB interface/charger………asking $196 SOLD!

BRB 70cm GPS transmitter, with wire whip antenna, LiPo battery (older model)…………asking $125 SOLD!

BRB 70cm GPS transmitter, with wire whip antenna, LiPo battery (new model)………………….asking $140 SOLD!

BRB TX radio transmitter/tracker (RDF), with wire whip antenna, and LiPo battery………asking $42 each (2 1 available) SOLD!

BRB USB interface & battery charger…………………asking $8 ea. (3 1 available) SOLD!

Arrow 5 element Yagi antenna, breakdown model, includes cable……………………asking $42 SOLD!

Arrow attenuator………………………….asking $28 SOLD!

Altus Metrum TeleBT “ground station”, includes cord if you want to use it…………………….asking $85 SOLD!


Garmin 60CSx………………………………asking $160 SOLD!

Garmin to Kenwood interface cable (tough to find)…………………..$20 SOLD!

Extra wire whip antenna……………………….$4 SOLD!

Extra LiPo (works with BRB 70cm transmitter)…………………….$3 SOLD!

 

[stealth6]

Airframe, tubes ----
Please note that due to size, shipping may be pricey. These are great deals IF you buy a bunch or in lots…..not so great if you just buy a piece or two (because of shipping costs).

Filament wound fiberglass…………………………

4” x 48”, white, (has 3 fin slots cut)…………………………………………asking $40 SOLD!
4” x 6.4” COUPLER, white………………………………………………..asking $6 SOLD!
3” x 44”, red, (has 3 fin slots cut)……………………………………….asking $35 SOLD!
3” x 22”, red……………………………………………………………………..asking $18 ea. (2 available) SOLD!
3” x 7” COUPLER, red……………………………………………………..asking $5 SOLD!
3” x 15”, thinwall, black (has 3 fin slots cut)…………………………asking $12 SOLD!
54mm x 22.5”, thinwall, black, (has 3 fin slots cut)………………………asking $14 SOLD!
38mm x 15.5” COUPLER, red………………………………………………..asking $8 SOLD!

54mm x 24”, natural………………………………………………asking $15 SOLD!
54mm x 16”, natural………………………………………………asking $10 ea. (2 available) SOLD!
54mm x 12”, natural………………………………………………asking $8 SOLD!
54mm x 18”, natural (has shear & vent holes drilled)…………………asking $22 SOLD!
54mm x 6” COUPLER, natural………………………………………………asking $4 SOLD!
38mm x 20”, natural…………………………………………asking $12 SOLD!
38mm x 16”, natural…………………………………………asking $9 SOLD!
38mm x 12”, natural………………………………………..asking $7 ea. (2 available) SOLD!
38mm x 9”, natural…………………………………………asking $6 ea. (3 available) SOLD!
38mm x 4” COUPLER, natural……………………….asking $3 ea. (2 available) SOLD!
38mm x 33” thinwall, natural (has 3 fin slots, and relief holes drilled)……………..asking $18 SOLD!
29mm x 6”, natural…………………………………….asking $3 ea. (3 available) SOLD!
24mm x 7”, natural……………………………….asking $4 (THESE ARE VERY HARD TO FIND) SOLD!

BlueTube…………………………

3” x 48”…………………………………………asking $16 SOLD!
3” x 48” COUPLER………………………………asking $16 SOLD!
2.6” x 24.5”…………………………………………asking $7 SOLD!
54mm x 33. 5” COUPLER………………………asking $9 SOLD!
38mm x 48”…………………………………………asking $9 SOLD!
38mm x 41” COUPLER……………………………asking $8 SOLD!
29mm x 48”…………………………………………asking $7 SOLD!

PML Phenolic………………………………………………
4” x 36” COUPLER…………………………………………..asking $13 SOLD!
3” x 36” COUPLER……………………………………………asking $10 SOLD!
3” x 36” COUPLER (note: has a broken hole in center, consider it as two 15” pcs)………………asking $7 SOLD!
54mm x 36” COUPLER…………………………………..asking $7 SOLD!


Big stash (“grab bag&#8221 of mostly HPR tubing cutoffs and small lengths. Some fiberglass, some phenolic, some Quantum, some glass wrapped cardboard, some heavy cardstock. Some airframe/motor mount, some coupler sized. Lengths from 3” to 14”, diameters 29mm to 4”. At least 30 pieces. ……………………………………….asking $24 for the lot. SOLD!


Big stash of LPR tubing. Much of it full length, but some cutoffs as well. Most of it is heavy or thickwall cardboard, but some is standard thickness. Some is foil lined and/or extra heavy duty. LOC, Semroc, Estes, etc. Airframe/motor mount and coupler diameters, from 13mm on up to 3”. Lengths up to 34”………………………………………asking $40 for the lot. SOLD!

 

[stealth6]

Video, etc. ----

#16 808 HD keychain Video Camera, includes 8GB micro SD card, cables, all checked by BayouRat. ………………..asking $42 SOLD!

Mobius mini HD Video Camera, includes 16GB micro SD card, cables, tripod mount, checked by BayouRat……………….asking $60 SOLD!

Landru 3D printed shroud, for #16 808, 54mm airframe…………….NEW………………………asking $9 SOLD!
Landru 3D printed shroud, for #16 808, 2.6” airframe…………….NEW………………………asking $9 SOLD!
Landru 3D printed shroud, for Mobius, 3” airframe……………(been shaved down a bit for better fit)……………asking $9 SOLD!

 

[stealth6]

Special Altimeter / 3D Sled combinations……………………………
These were set up specifically for a two stage rocket. The Raven was for the sustainer (38mm airframe) and can handle separation charge, sustainer ignition, apogee ejection, and mains ejection events. The RRC2+ was for the booster (inside a 54mm to 38mm interstage coupler) and can handle apogee and/or mains ejection events.

RRC2+ mounted on a Landru 3D printed sled, 38mm, includes switch, LiPo battery, wiring to battery (w/a disconnect to allow for easy charging)……………………………………………………..asking $46 SOLD!

Raven altimeter on a Landru 3D printed sled, 38mm, and a 9V battery holder (also 3D printed), includes switch, and all wiring preconnected……………………………………asking $96 SOLD!

Pre-Made Interstage Coupler……FWFG, 54mm airframe to 38mm airframe. Bulkheads, rails, hw, etc. Made to accept the RRC2+/3D sled combo mentioned above. 98% ready to go, just a couple of minor tweaks to be flight ready. Well made, and built to last
This is not shown in the photo in this post. See it included in the photo of "Miscellaneous", being posted after this…………………………………………..asking $34 SOLD!

 

[stealth6]

Total Miscellaneous….lots of interesting bits, good deals…………………..

29mm FWFG motor mount, with CRs glued on (for 38mm airframe), 29mm AeroPack retainer body, and kevlar shock cord. Slide it up into your fincan and you’re good to go………………………………………..asking $12 SOLD!

MissileWorks sled for 3D printed AltiCone, ready for RRC3. Brand new. Note that this does NOT fit the AltiCone that I have on sale elsewhere (you need a different shoulder)…brand new………………………….asking $4 SOLD!

3D printed 38mm minimum diameter breakaway rail guide. Allows you to launch min. dia. rockets (with no rail buttons) on a standard rail launch pad. No need for a special tower……………………………….asking $6 SOLD!

Cable Cutters, 3 total, with a few extra bits (caps, orings, cableties, etc.)………………………$14 for the lot SOLD!

G10 fin guides for 38mm airframe…………………………….asking $5 SOLD!

CTI 54mm aft closure………………………….asking 5$ SOLD!

29/38mm SlimLine retainer wrench, used with threaded rings…………………………..asking $3 SOLD!

Phenolic nosecone tip, with welded stainless eyebolt (takeoff from a 3” Punisher)………………….asking $4 SOLD!

Aerotech seal disks………………………..29mm, $2SOLD! …………….38mm, $2 SOLD! ……………..54mm $3 SOLD!

Assorted/misc. nomex & Kevlar chute protectors (and cloth), used, 3” to 12”, six pieces?……………………….$8 takes the lot SOLD!

Mostly full pack of Quest recovery wadding………………………..$3 SOLD!

Homemade 3way cluster whip………………………………$4

Box of small LiPo batteries, 3.7v 130mAh, most fit Ravens, good shape, about 10 total……………………$12 for the lot SOLD!

Chunks of balsa wood, 1 pc is 3”x3”x12”, and 2 other pcs are 3”x1/2”x12”…………………..$5 for all three

Oddball Balsa nosecone, this was made for a bamboo rocket I once built/flew which has since met it’s demise. The shoulder fits into a 38mm airframe, but the outer diameter is approximately 2.25 inches. ……………………………$4

 

[stealth6]

MISC…………………………………………………………………………………..

Bunch of shear pins, “both” sizes (2/56 and 4/40), est. 100 each or so?...............................$8 for the lot SOLD!

Bunch of removable rivets, small and medium sizes, 3 or 4 dozen? More?..............................$8 for the lot SOLD!

Whole bunch of misc./various rail buttons. Most are 1010, but also a bunch of mini and micro in there. Bunch of styles: one piece, 3 piece, delrin, plastic, recessed, colored, black, etc. Includes a few ACME aluminum rail guides and 3/8” aluminum lug in there. Also 4 of those cool SC Precision airfoil buttons (that sell for like $10 a pair!). Also includes a decent bunch of screws/bolts and even a few well nuts. …………………………………………………asking $18 for the lot SOLD!

CTI Pro DAT 54mm delay adjuster tool……………………………..asking $12 SOLD!
CTI Pro DAT 29mm to 38mm delay adjuster tool……………………..asking $7 SOLD!
Aerotech RMS (18mm to 38mm) delay adjuster tool…………………..asking $9 SOLD!
Aerotech DMS “Universal” delay adjuster tool…………………………asking $6

 

[stealth6]

Ok, that's pretty much it.
I'm "done" posting things up for sale, so feel free to post GENERAL comments/queries on this thread again.
As stated before, please email me for any specific questions or "I'll take X" notes.....do NOT send PMs via the forum.

Based on past sales like this (if there actually has been any like this!), I'm expecting to need to sift through hundreds of emails. It may take days before I get to yours, but I will.

If you see something on this thread go from black to grey, with a red "SOLD" pasted on, and you haven't heard directly from me first, that means that someone else got it. I will notify the actual buyer who "won" before I change the listing on the thread. So, you will know if it's you or not.

And yes, I will probably list a few more bits and pieces I find that I forgot.

Now, if you will excuse me, I have some emails to attend to........

thanks everyone,
s6

 

[ActingLikeAKid]

Just in to say: THANK YOU for doing this and doing it so professionally. As a relative newbie to MPR and HPR, this is giving me a chance to get a lot of the "if I had ____ then I could _____" stuff I've been eyeing but not quite ready to pull the trigger on. I raise my glass to you.

 

[MikeyDSlagle]

Good job sir. You have obviously put lots of time and money into your collection. I hope I got my email in early enough.

 

[Tonimus]

Tried to make my email as painless as possible. Thank you for the sale. Well done, sir.

 

[dhbarr]

Ok, that's pretty much it.
I'm "done" posting things up for sale, so feel free to post GENERAL comments/queries on this thread again.
As stated before, please email me for any specific questions or "I'll take X" notes.....do NOT send PMs via the forum.

Based on past sales like this (if there actually has been any like this!), I'm expecting to need to sift through hundreds of emails. It may take days before I get to yours, but I will.

If you see something on this thread go from black to grey, with a red "SOLD" pasted on, and you haven't heard directly from me first, that means that someone else got it. I will notify the actual buyer who "won" before I change the listing on the thread. So, you will know if it's you or not.

And yes, I will probably list a few more bits and pieces I find that I forgot.

Now, if you will excuse me, I have some emails to attend to........

thanks everyone,
s6

:handshake::clap::clap::handshake:

 

[blackbrandt]

Email dispatched. Gonna pick my secret santa gift up as well.

 

[amellrotts]

I emailed as well.... Hope I get what I asked about. I hope you don't have too many tire kickers wasting your time. Thanks again!
-Chris Amell

 

[dmgrime]

Ditto to the above ... email out, fingers crossed!

 

[cavecentral]

Sent several emails as things were being posted. Haven't heard a peep yet, and know I was beat to the buzzer on a few items marked sold already. Time for bed.

 

[stealth6]

OK, I'm exhausted. Quitting for the night. Got to work a bit tomorrow, so will be hit and miss all day then.
Kevin (cavecentral).... I did manage to get a note off to you. Yes, you got beat to the buzzer on a few things, but not as bad as you might think. We'll "talk" tomorrow.

thanks everyone so far,
s6

 

[noffie79]

Great job on this well run and organized sale! Hope I sent my email fast enough. Lol

 

[stealth6]

9:30am Sunday.
Heading off to work, so won't be responsive again until later this evening.

Thanks everyone for your patience so far.
Please remember that no one is getting bumped out of their place in line.
So far so good.

s6

 

[cavecentral]

9:30am Sunday.
Heading off to work, so won't be responsive again until later this evening.

Thanks everyone for your patience so far.
Please remember that no one is getting bumped out of their place in line.
So far so good.

s6

Cool. Just waiting for an email reply before I send payment - I think a couple items might be already sold, want to clarify first to get the amount correct.

 

[fyrwrxz]

Good grief, Dave! First and the most expected, you did a heck of job organizing and posting-kudos, brother! Second; my heart's in my throat and stomach in my shoes when i realize how much 'rocket crap' (Viking Princess quote) and 'miscellaneous treasure' (Nerd Herd quote) I have if I bail too! Pm at your 'other'
e-mail but no hurry. Thanks an behalf of all the TRF "Nerd Herd" for posting your collection here-good to see your exquisite and innovative birds will still be flying at meets across the US! Nothing but best wishes in your future endeavours, stay in touch and drop a line or two, so we know how you are fairing.-the other dave-

 

[dhbarr]

Good grief, Dave! First and the most expected, you did a heck of job organizing and posting-kudos, brother! Second; my heart's in my throat and stomach in my shoes when i realize how much 'rocket crap' (Viking Princess quote) and 'miscellaneous treasure' (Nerd Herd quote) I have if I bail too! Pm at your 'other'
e-mail but no hurry. Thanks an behalf of all the TRF "Nerd Herd" for posting your collection here-good to see your exquisite and innovative birds will still be flying at meets across the US! Nothing but best wishes in your future endeavours, stay in touch and drop a line or two, so we know how you are fairing.-the other dave-

+1. I'm going to be coming back to this thread for build inspiration for quite some time, most likely. What an exit!

 

[MikeyDSlagle]

So when does the good stuff get posted? I'M KIDDING! Super nice stuff I did manage to get my email in early enough to score just over 100 bucks worth, otherwise it would have been over 200. Whew. Lol. Wish I could spend more, my bank account has been ravaged this month!

Mikey D

 

[stealth6]

So.....an update. Sunday evening.

As can be seen, a LOT has sold. But there is actually still a lot of things up for grabs. Some great rockets (some of my very best in fact), still nice hardware (including the "collector's" stuff), a fair bit of airframes, chutes, and other bits. But yeah, there's a whole lot gone or spoken for. It has been quite a day to say the least.

The main reason for this update is to acknowledge a few folks who are still probably waiting to hear from me. Rest assured, any of you (and you know who you are) who haven't heard anything yet, you have NOT lost your place in line, nor has someone jumped ahead of you. It's just that things got WAY backed up (as expected). For most of you who are still waiting for some sign, the deal is usually that I have certain items that you want that someone else ahead of you has likely either said that they'd take it but haven't yet paid, or they are still deciding what to do. Since their place in line gave them first dibs, I'm waiting on word from them. But if they don't get back in a day or two, or they decide to back out, I'll be getting in touch with the next in line (those of you who are waiting for me to contact). It's actually pretty complicated, but I do have a handle on it. And I won't leave any of you waiting "forever".

Again, thanks for your patience. Thanks A LOT to all of you who bought and paid already. Like I said, this has been quite a day.

It will continue.....
s6

 

[cavecentral]

I might take a second look once the dust is settled.

 

[MikeyDSlagle]

I might take a second look once the dust is settled.

Well, that goes without saying.

 

[ksaves2]

Guy that got the D72A should'a sprung for the GPS interconnect cable and the 60CsX. Good prices for both. Using a BeelineGPS one has a foolproof map in hand that will automatically plot the rocket on the map. Worried about the map situation?
Well, as long as one isn't concerned about the latest POI's (Points of interest) can easily download Open Source Maps that are pretty darned good: https://garmin.openstreetmap.nl/. I already have a 72 and a Cs and CsX for backup.
I lament that someone who obviously was very involved is leaving and hope he keeps a few mementos. Kurt (I didn't buy anything)

 

[BDB]

Stealth, you gave many of us some great deals this weekend, but I was wondering if you could leave us with one more thing before you exit the hobby. You are a master builder, and in my opinion, you make the best looking filets in the hobby. Could you please tell all of us your secret to making beauties like these with the rounded leading and trailing edges?....

 

[Viking]

...there is actually still a lot of things up for grabs ....still nice hardware (including the "collector's" stuff)...
s6

Hmmm, this has me a bit paranoid that I got your email address correct!
Will check it when I get home from work. My fingers are crossed! haha

Edit: oh crap, just realized I never included my TRF name in the email
Apologies Dave, have re-sent.