Brent
Well-Known Member
- Joined
- Jan 19, 2009
- Messages
- 1,763
- Reaction score
- 129
This is the one I bought a couple of weeks ago. I got around to playing with it this morning. First thing I noticed, buttons A,B,C,D are inverse of the relays... A=4, B=3, C=2 and D=1.
Second thing, I wanted to try to rig this up so in order to fire, you had to hold down A and D... I could NOT make it work that way.
I was able to make it work like I wanted using relays 1/2, Buttons C/D... both have to be down to fire.
When trying to use relays 3/4, they acted differently, either latching, or a 'flash' on/off...
There are NO instructions with these units. I just played with it for awhile. Bob, if you have any idea how to make all 4 relays momentary, so I can do A/D, please let me know.
Also, if you have worked out any kind of instructions, please post them... it would be SOOOO helpful. I found a little bit of info that I attached here.
The Txt file might be correct for a similar version, but as I said above, my relays/buttons are backwards. Need to play with the jumpers a bit more.
Thanks!
Ron
This is how the one I ordered is suppose to work:
Mode Toggle: Only connect Jumper-2.
Press big button: Turn on relay 1 (connect B and C, disconnect A and B)
Press big button again: Turn off relay 1 (disconnect B and C, connect A and B)
Press small button: Turn on relay 2 (connect B and C, disconnect A and B)
Press small button again: Turn off relay 2 (disconnect B and C, connect A and B)
Mode Momentary: Only connect Jumper-1.
Press big button and hold: Turn on relay 1 (connect B and C, disconnect A and B)
Release big button: Turn off relay 1 (disconnect B and C, connect A and B)
Press small button and hold: Turn on relay 2 (connect B and C, disconnect A and B)
Release small button: Turn off relay 2 (disconnect B and C, connect A and B)
Mode Latched: Do not connect Jumper-1 and Jumper-2.
Press big button: Turn on relay 1 (connect B and C, disconnect A and B)
Turn off relay 2 (disconnect B and C, connect A and B)
Press small button: Turn on relay 2 (connect B and C, disconnect A and B)
Turn off relay 1 (disconnect B and C, connect A and B)