ChrisAttebery
Well-Known Member
- Joined
- Feb 15, 2014
- Messages
- 2,454
- Reaction score
- 90
I've been working on this design for a couple months and I'm finally ready to preview it.
Key features:
The tower will be EASILY and infinitely adjustable from 24mm OD up to 4.5" OD.
75mm tower up to 11.5" fin span.
98mm tower up to 14.5" fin span.
Handles 3 or 4 fins.
Only one tool needed to assemble/adjust.
All metal.
There will be 3x .187" steel rings. Each ring will have holes for 3 or 4 sets of rail guides. Each ring will also have 1/2" holes for stakes or tie downs All of the hardware necessary for assembly will be included. The vertical guide rails will be 1" EMT tubing available at your local HW store for less than $10 each. The purchaser will have to drill 3 holes into each tube for mounting.
Tower set up for 4.5"
Tower set up for 29mm
The 75mm tower will be priced at $400. The 98mm tower will be priced at $450.
Key features:
The tower will be EASILY and infinitely adjustable from 24mm OD up to 4.5" OD.
75mm tower up to 11.5" fin span.
98mm tower up to 14.5" fin span.
Handles 3 or 4 fins.
Only one tool needed to assemble/adjust.
All metal.
There will be 3x .187" steel rings. Each ring will have holes for 3 or 4 sets of rail guides. Each ring will also have 1/2" holes for stakes or tie downs All of the hardware necessary for assembly will be included. The vertical guide rails will be 1" EMT tubing available at your local HW store for less than $10 each. The purchaser will have to drill 3 holes into each tube for mounting.
Tower set up for 4.5"
Tower set up for 29mm
The 75mm tower will be priced at $400. The 98mm tower will be priced at $450.
Last edited: