Sold BALLS 31 Launch – Experimental Rocket and Supplies

[mindiameter]

Items for delivery at BALLS 31. Remaining inventory posted on Yard Sale with shipping provided.

ROCKET (Zip-it-Up}
It’s time to sell this very complete experimental rocket and motor. The rocket includes a Kosdon P motor - one of his famous 5” x 83.625” systems. Additional items include:

1. Nozzle (one flown on the Kosdon P 12000 motor)
2. A set (2) x 4’ casting sets: phenolic liner + paper casting tube. Additional available for purchase
3. Giant Leap Rocketry TAC-9-B and TAC-9-C (12 and 16’) parachutes
4. 100' x 1" nylon strap
5. Rocket stand

For more specifics:
attached Rocksim drawing and first two of the BALLS, Class 3 waiver for the last flight, motor components, video and additional pictures
https://www.youtube.com/watch?v=RfbkrN896h0

Price: $2,000
Delivery: BALLS 31 or within 50 miles of the Bay Area

CHEMICALS
(3) x 1 gallon R45M
Price: $110/ea

(3) x (10 lbs) AP 200
Price: $110/ea

(20 lbs) AP 200
Source: RCS
Price: $250

(50 lbs) AP 400
Price: $500

(5 lbs) Al 500 mesh
Price: $50

(5 lbs) Al 500 mesh
Price: $50

(4 lbs) Mg 325 mesh
Price: $75

MOTOR CASES (98mm and 4”)
All machined from 4.0” OD by 3.5” ID 6061 aluminum tube with groves for snap rings. Wall thickness of 98mm tubes is .175”. Tubes compatible with Always Ready Rocketry casting sets and possible other. Check picture with items listed from left to right.

18.6 x 4”
Price: $50

18.5” x 98mm with thrust ring
Price: $75

36.5” x 98mm with thrust ring
Price: $125

36.7” x 4”
Price: $100

54 and 98MM/4” STANDARD MOTOR CASTING SET (phenolic liner + paper casting tube)
Standard 54mm and 98 mm sets were purchased from Always Ready Rocketry – check site for specs. All liners and tubes are 48” long

54mm
Quantity: 5
Price/set: $20

98mm/4”
Quantity: 3
Price/set: $35

98mm High Temperature/Long Burn Casting Set (phenolic liner + paper tube)
Liner: 3.47” OD x 3.30” ID
Tube: Same as standard set
Quantity: 1
Price/set: $50

5” CUSTOM CASTING SET (phenolic liner + paper tube)
Liner: 4.475" OD X 4.254" ID
Tube: 4.239" OD 4.125" ID "
Quantity: 6
Price/set: $50

5” High Temperature/Long Burn Set (phenolic liner + phenolic tube)
Liner: 4.47” OD x 4.26 ID
Tube: 4.24” OD x 4.11” ID
Quantity: 2
Price/set: $60

More Items Tomorrow

 

[manixFan]

PM incoming on the MG

Tony

 

[mindiameter]

PM incoming on the MG

Tony

Tony,

Are you attending BALLS?

 

[Builder]

Would you be interested in shipping 10 lbs of the AP 200 to me now ? Chuck

 

[manixFan]

Tony,

Are you attending BALLS?

I hope so! I say that after seeing the reports today (Sept 2nd) of the rain and mud. I know BALLS is a few weeks off, but still, a worrisome situation.

Hopefully things will be cleaned up and dry enough by the 21st.


Tony

 

[mindiameter]

I hope so! I say that after seeing the reports today (Sept 2nd) of the rain and mud. I know BALLS is a few weeks off, but still, a worrisome situation.

Hopefully things will be cleaned up and dry enough by the 21st.


Tony

Agreed...we'll have to wait for notification the BALLS launch is cancelled - assume we'll know by 9/18.

Randy

 

[mindiameter]

Would you be interested in shipping 10 lbs of the AP 200 to me now ? Chuck

OK...what's your address and I'll calculate shipping.

 

[mindiameter]

I'm going to bring the items to BALLS and if not purchased, sell on the Rocketry Forum.

Thanks,

Randy

 

[Salvage-1]

thanks for the deal of the chems, cases, etc. I am talking to wife about a trip down to CA to pick up the rocket.

Rob