MarkII
Well-Known Member
- Joined
- Jan 18, 2009
- Messages
- 8,250
- Reaction score
- 46
My collection is very modest right now but I am steadily building it up. What I have so far:
Aerotech
(Aerotech brand)
24/60
29/40-120
38/360
38mm RAS
(Rouse-Tech brand)
24/40
38/120
CTI
Pro38 1 grain
The Pro38 was my first reloadable motor; my most recent is the AT 38/360 (and the RAS).
On my shopping list: CTI Pro29 3 grain + spacers; AT/R-T 29mm RMS + RAS; more AT/R-T 24mm cases (both sizes); AT/R-T 54mm RMS + RAS; more CTI Pro38s; CTI Pro54s + spacers. Maybe some Loki motors. All as finances permit. Probably hybrids down the road.
My high power hardware will remain very limited until after I obtain L1 certification. Again, as finances permit.
Here is a picture from a couple of years ago. Not shown are the AT24/60 and 38/360 and, of course, the brand-new reload adapters.
MK
Aerotech
(Aerotech brand)
24/60
29/40-120
38/360
38mm RAS
(Rouse-Tech brand)
24/40
38/120
CTI
Pro38 1 grain
The Pro38 was my first reloadable motor; my most recent is the AT 38/360 (and the RAS).
On my shopping list: CTI Pro29 3 grain + spacers; AT/R-T 29mm RMS + RAS; more AT/R-T 24mm cases (both sizes); AT/R-T 54mm RMS + RAS; more CTI Pro38s; CTI Pro54s + spacers. Maybe some Loki motors. All as finances permit. Probably hybrids down the road.
My high power hardware will remain very limited until after I obtain L1 certification. Again, as finances permit.
Here is a picture from a couple of years ago. Not shown are the AT24/60 and 38/360 and, of course, the brand-new reload adapters.
MK
Last edited: