The Nike Ajax is ready to go so i started the interceptor E.Here's a few pics.
Main fins on epoxy fillets applied
After thinking about aplying the decals i thought the sharp angle where the wing support meets with with the wing may pose a problem with the decals making full contact.So i put a little more wood filler in to smooth the transition.Hopefully it will sand nice and smooth after drying.
Starting the second set of fins,i used a disc/belt sander to start taking some material off the wing supports,this saved a lot of sanding on the first set.
Main fins on epoxy fillets applied
After thinking about aplying the decals i thought the sharp angle where the wing support meets with with the wing may pose a problem with the decals making full contact.So i put a little more wood filler in to smooth the transition.Hopefully it will sand nice and smooth after drying.
Starting the second set of fins,i used a disc/belt sander to start taking some material off the wing supports,this saved a lot of sanding on the first set.