kemal eliacik
Member
- Joined
- Feb 13, 2019
- Messages
- 5
- Reaction score
- 0
Attach your sim ( .ork )
I tried but it didn't.
Firstly, thanks for your response. However, since there is a competition, I will not be able to share the file.
[QUOTE = "BDB, posta: 1860146, üye: 24157"] Bu uyarı, dağıtımın çok erken (roket hala yükselirken) veya çok geç (roket aşağı inerken) anlamına gelir. Simülasyonun çıktısı, roketin açılma sırasında ne kadar hızlı hareket ettiğini size söyleyecektir. İdeal olan 0 olacaktır, yani dağıtım apogee'de gerçekleşir. Sim ayrıca size en uygun gecikme zamanını söyleyecektir. Gecikme sürenizi bu numaraya ayarlayın ve uyarı kaybolmalıdır.
Elektronik dağıtım kullanmayı mı düşünüyorsunuz? Eğer öyleyse bu bir tartışma noktasıdır. Motor dağıtımını kullanıyorsanız, gerçek uçuşun sim ile eşleşmesi için gecikmeyi ayarlamanız gerekir. [/ QUOTE]
Evet, elektronik dağıtım kullanmayı düşünüyorum.
This warning means that the deployment is too early (when the rocket still rises) or too late (the rocket goes down). The output of the simulation will tell you how fast the rocket moves during opening. The ideal would be 0, ie the distribution takes place in apogee. Sim will also tell you the most appropriate delay time. Set the delay time to this number and the warning should disappear.
Are you considering using electronic distribution? If so, this is a point of discussion. If you are using engine deployment, you must set the delay for the actual flight to match the sim.
Yeah, I'm thinking of using electronic distribution. [/ QUOTE]
if (status.getRocketVelocity().length() > 20) {
status.getWarnings().add(new Warning.HighSpeedDeployment(status.getRocketVelocity().length()));
}
Every single one of my sims for all my rockets always gives that warning. And I summarily ignore it. I don't think OR understands DD. It expects a nice, soft apogee deployment speed for the main, but with DD you are falling at a good 75 fps under drogue, more if you are drogueless or using a streamer.
Personally, I would ignore it.
Enter your email address to join: