gorillamotors
Well-Known Member
- Joined
- Jan 18, 2009
- Messages
- 260
- Reaction score
- 14
Here is a poll to determine which nozzle composition you prefer?
Not myselfRelaunching Gorilla motors?
54mm thru 98mmWhat size motor?
I mean high quality Graphite
If I recall correctly, one of the nozzle "manufactures" made a statement on TRF a while back that the lower/mid grade graphite actually made better nozzles and worked better for nozzles than the "high grade" graphite and was cheaper. The reason he didn't make nozzles with the better mid grade graphite was because customers demanded the "high quality" graphite despite the fact it actually made a lower quality nozzle.
before I started making graphite nozzles, I bought some that turned out to be large particle and they are very porous
don't clean one and then use it the same day without thorough drying, the soaked up liquid will flash to steam and explode the nozzle
I make all mine from iso molded
before I started making graphite nozzles, I bought some that turned out to be large particle and they are very porous
don't clean one and then use it the same day without thorough drying, the soaked up liquid will flash to steam and explode the nozzle
I make all mine from iso molded