Egg proton

[David Schwantz]

I did call Cris, but does anyone have the new Proton and do you know the measurement of the tallest part of the board? Thanks, Dave.

 

[cerving]

10mm would do it, that's the buzzer and the terminal blocks. The latest Proton doesn't have the through-hole rectifiers. I have a 38mm two-stager with an older Proton in it, the allthreads in the sustainer AV bay go down the middle (with an insulating plastic tube) and it fits just fine on a small sled with a relatively flat 370 mAH 2S Lipo.

 

[David Schwantz]

thanks Cris.

 

[mbeels]

Here is a example of a Proton in a 38mm coupler:

LaserLoc

https://www.rocketryforum.com/threa...otors-with-modifications.159420/#post-1998989
LaserLoc with modifications

Edit: nevermind, I can't figure out how to post a workable link.....

 

[David Schwantz]

If you have a pic, I'll PM my info for you to send it.

 

[mike_bar]

Here is a example of a Proton in a 38mm coupler:

LaserLoc with modifications

Edit: nevermind, I can't figure out how to post a workable link.....

This post?

Post in thread 'Loc LaserLoc 163, Mach 1 on Level 1 motors (with modifications)'

https://www.rocketryforum.com/threa...motors-with-modifications.159420/post-1998989
Test URL Code



Edit: I couldn't post a good link as well. Weird...

 

[David Schwantz]

 

[cerving]

<post deleted... apparently the TRF Copy Link Address truncates the text>

I was able to find it by taking the "'Loc LaserLoc 163, Mach 1 on Level 1 motors" and searching the titles on TRF. It's post #50.

 

[mike_bar]

<post deleted... apparently the TRF Copy Link Address truncates the text>

Yeah, something weird is happening to TRF links. Links to external websites seem to work fine.

One more time...

Find Post in this TRF thread (old-fashioned search):
Forums > Rocketry General Discussion Forum > High Power Rocketry (HPR) >
Loc LaserLoc 163, Mach 1 on Level 1 motors (with modifications)
Post #19

Original URL:
https://www.rocketryforum.com/threa...motors-with-modifications.159420/post-1998989
Test Tiny URL:
http://tinyurl.com/3j365j2z
Good luck!

 

[David Schwantz]

Found it. Thanks guys, Dave.

 

[mbeels]

Yeah, something weird is happening to TRF links. Links to external websites seem to work fine.

One more time...

Find Post in this TRF thread (old-fashioned search):
Forums > Rocketry General Discussion Forum > High Power Rocketry (HPR) >
Loc LaserLoc 163, Mach 1 on Level 1 motors (with modifications)
Post #19

Original URL:
https://www.rocketryforum.com/threa...motors-with-modifications.159420/post-1998989
Test Tiny URL:
http://tinyurl.com/3j365j2z
Good luck!

Hey! Thanks, that tiny URL worked. Guess it just needs short URLs...