- Joined
- Jan 27, 2009
- Messages
- 4,499
- Reaction score
- 2,977
I've been thinking about doing a TSR-2 for a while, wingspan is short so I had to make it fairly large to have good wing area. I did move the tailplane in line with the wing for simplicity of construction. The fuse on the real thing is fairly boxy so I went with all foam 6mm depron sheet box construction with hand rolled 3mm intake cones. Just need to sheet the bottom, round it all off and make a cockpit. 42" long, 22" wingspan before the tips were cranked down. Fuse is about 3 3/4" tall and about 1 3/4" wide. Only about 5 oz with the bottom sheeting so pretty light for the size
Last edited: