ChuckH
Well-Known Member
- Joined
- Aug 11, 2011
- Messages
- 541
- Reaction score
- 337
Looking to thin the herd again this year and have the following items for pick up at Midwest Power. I will ship any items that do not sell at Midwest Power (buyer pays shipping and PayPal fees; checks and money orders also accepted).
Custom fin set made from 3/8" thick carbon fiber/Nomex honeycomb composite board - $150
Light weight and very strong, these were originally for a 7.5" diameter project with a 4" motor mount. Edged with 3/8 wooden dowels. The dimensions are as follows:
Root chord: 24.5"
Span: 10.125"
Tip chord: 7.5"
Sweep length: 14.5"
Tab depth: ~1.875"
Weight: ~10.5 oz per fin
3/8" thick carbon fiber/Nomex honeycomb composite board, 12" x 24" SOLD!
This material is currently unavailable from Giant Leap. I was going to make a fourth fin for the set listed above, but never did.
Unused Rocketman R19 Pro Experimental parachute. Made of 1.9 Low-porosity Rip-Stop nylon, red and blue - $225
New in box Aerotech HV Arcas kit - $45
Unused Missile Works PET2 timer - $30
Custom fin set made from 3/8" thick carbon fiber/Nomex honeycomb composite board - $150
Light weight and very strong, these were originally for a 7.5" diameter project with a 4" motor mount. Edged with 3/8 wooden dowels. The dimensions are as follows:
Root chord: 24.5"
Span: 10.125"
Tip chord: 7.5"
Sweep length: 14.5"
Tab depth: ~1.875"
Weight: ~10.5 oz per fin
3/8" thick carbon fiber/Nomex honeycomb composite board, 12" x 24" SOLD!
This material is currently unavailable from Giant Leap. I was going to make a fourth fin for the set listed above, but never did.
Unused Rocketman R19 Pro Experimental parachute. Made of 1.9 Low-porosity Rip-Stop nylon, red and blue - $225
New in box Aerotech HV Arcas kit - $45
Unused Missile Works PET2 timer - $30
Last edited: