Colonel_Hogan
New Member
- Joined
- May 5, 2019
- Messages
- 3
- Reaction score
- 0
I recently launched an HPR rocket and it barely made it off the launch rail after experiencing some sort of engine difficulty. The staff at the launch site said the failure was caused by a bulkhead that failed and allowed the engine to go through the vehicle's body but I'm not sure that I fully understand what happened and I have some doubts. If anyone could let me know what they think about what might have happened I would be greatly appreciate it.
A video of the failure can be found here https://livestream.com/systemsgo/Rockets2019CTXDay4/videos/190893380 at a time stamp of 2:14:30 (Rocket #114). This video link will most likely not work after May 17.
Rocket Specs
Vehicle Engine: Hyper Tek J190 with .098" orrifice and JFX fuel grain
Vehicle weight: 7.7 Lbs
Vehicle Lenght: 62.5"
Images
Remains of the Rocket
Vehicle waiting to be launched
Vehicle disassembled after completion
A video of the failure can be found here https://livestream.com/systemsgo/Rockets2019CTXDay4/videos/190893380 at a time stamp of 2:14:30 (Rocket #114). This video link will most likely not work after May 17.
Rocket Specs
Vehicle Engine: Hyper Tek J190 with .098" orrifice and JFX fuel grain
Vehicle weight: 7.7 Lbs
Vehicle Lenght: 62.5"
Images
Remains of the Rocket
Vehicle waiting to be launched
Vehicle disassembled after completion