Got some things done over the weekend...
Avionics bay/nose cone:
- received parachute (58" standard chute with spill hole added)
- 1/4-20 threaded rods are cut to length
- positioned the 3D printed sled where desired and drilled access holes
- drilled vent hole and shear pin holes in nose cone and booster tube as well
- added tubular kevlar harness to nose cone tip (which has been glued in place as well)
Booster
- sanded centering rings, motor mount, and booster tube
- installed centering rings on motor mount
- glued the 1" strap kevlar bridle to top of motor mount
- Motor mount gets glued in the body tube this evening.
More to come...
View attachment 285727 View attachment 285728 View attachment 285729 View attachment 285730 View attachment 285731 View attachment 285732