Necromancer
Well-Known Member
- Joined
- Apr 20, 2008
- Messages
- 909
- Reaction score
- 0
Any problems with flight if all the fins don't match perfectly in size / shape?
I cut my Nike Smoke fins today but, one of the fins (its a 2-piece X-brace design for a 10" Smoke) trailing edges is about 1/8 to 1/4" too short.
Its probably not a big deal, but its driving me freakin' crazy since i tend to be a perfectionist and trying to find some justification in not going out and spending another $50.00 on another 5x5 sheet of 3/8" birch plywood.
Thanks
I cut my Nike Smoke fins today but, one of the fins (its a 2-piece X-brace design for a 10" Smoke) trailing edges is about 1/8 to 1/4" too short.
Its probably not a big deal, but its driving me freakin' crazy since i tend to be a perfectionist and trying to find some justification in not going out and spending another $50.00 on another 5x5 sheet of 3/8" birch plywood.
Thanks