Well, the PC Superpoxy seems to have set up pretty well. Meanwhile I recieved my MMT and Retainer from LOC. I read the instructions for the Aero Pack Retainer, and realized it will not fit the LOC Tube. I Emailed them, and I'll send it back. It is the only 24mm Aero Pack Retainer that LOC carries, so I assumed it would work. However, it is sized for Apogee and Estes MMTs. That's Okay, the MMT they sent me is Top Notch, and there is plenty to make multiple MMTs with. For this build, I will just go ahead and use my Estes 24mm Retainers, as they fit the LOC MMT. If LOC can't replace the Aero Pack, I may just keep it and reinforce an Estes Tube and make a MMT for a Scratch Build.
You may be able to remove the glassine layer. Scrore a ring first around the tube to limit how much pulls off. I had to do this to fit the Estes 29 mm retainer to an Aerotech tube. Depending on how much you want to use that retainer, but I think the Estes one won't look right on this model -- I'd go with a regular hook if the only way.