Nathan
☢
- Joined
- Apr 19, 2012
- Messages
- 2,230
- Reaction score
- 755
I just finished this Super DX3 . . .
Oooooo, shiny!
Single deploy only, I didn't get the optional altimeter bay.
Yes, I finished the coupler too. Not easy to do, that's a rough piece of cardboard.
Aft end view
I tried to get a shot of the fin edge bevels but it's a little out of focus
Nose cone tip close-up
Mirror finish on the nose cone
Mirror finish on the fins
One of these Porsches can go 0-500 mph in one second. The other one is a little slower.
- 4 coats filler primer
- 3 coats black enamel
- Stickershock vinyl decals
- 4 coats clear enamel
- wetsanded, polished, and waxed
Oooooo, shiny!
Single deploy only, I didn't get the optional altimeter bay.
Yes, I finished the coupler too. Not easy to do, that's a rough piece of cardboard.
Aft end view
I tried to get a shot of the fin edge bevels but it's a little out of focus
Nose cone tip close-up
Mirror finish on the nose cone
Mirror finish on the fins
One of these Porsches can go 0-500 mph in one second. The other one is a little slower.