Sheri's Hot Rockets New Release 1/24 Gemini-titan

[Sheri]

I AM VERY HAPPY TO ANNOUNCE MY LATEST KIT RELEASE!!

1/24 GEMINI-TITAN

THIS KIT HAS A LOT OF GREAT FEATURES INCLUDING MACHINED ALUMINUM SCALE NOZZLES THAT STAY ON FOR FLIGHT FOR POSITIVE MOTOR RETENTION!!! LARGE VINYL WRAP FOR EXTERIOR MARKINGS, WATERSLIDE DECALS FOR THE CAPSULE, 2 PIECE RESIN CAPSULE....etc..etc...

FOR ALL THE DETAILS/TO PURCHASE, CHECK OUT MY WEBSITE

website

or my ebay listings here:

ebay

Launch video here:

Launch video

 

[rokitflite]

You are out of control Sheri!

 

[mikeyd]

Your killing be Sheri I bought a Revell 1/24 capsule, and a 5" tube just to do this! I still had not decided on motor setup yet, and then you come out with that great looking aluminum setup on your kit. I have too much to build with the last kit I got from you now. By the way great looking kit!

 

[Rat]

That is AWESOME!!!!!

 

[rokitflite]

So what now... A Vostok next week???

 

[Sheri]

HAHAHA

Thanks guys!!!!The aluminum nozzles are a first for me, they work great!!!

Sheri

 

[Ltvscout]

Originally posted by sheri
HAHAHA

Thanks guys!!!!The aluminum nozzles are a first for me, they work great!!!

Very nice looking kits you have, Sheri. Do you turn the aluminum yourself?

Note to the pervs. I said KITS!

 

[Rocketcrab]

Oh c'mon!!! I just was ready to spend the $$$ for the Little Joe II, and here you come with one of my favorites, after the Saturn 1B and Vostck/Soyuz!!! How about a little warning so I can save up the bucks!!

 

[cjl]

Sheri - darn you

You keep coming out with all these amazing kits FAR faster than I could ever afford them

 

[dwmzmm]

(sigh) What's next?!?!

 

[dwmzmm]

Originally posted by dwmzmm
(sigh) What's next?!?!

Oh, I think I know, a Mercury Atlas!!

 

[Sheri]

Originally posted by dwmzmm
Oh, I think I know, a Mercury Atlas!!

HAHA, not sure yet whats next!!! LTVSCOUT, I HAVE A MACHINE SHOP TURN THEM FOR ME.

 

[Sheri]

Here's another shot of the nozzles from the end, you can see the motor nozzles at the top of them. sorry if its a little blurry.

Wow, think thats big enough!!!!

 

[cjl]

How big are the mounts in this one?

Could it handle a pair of 29/360 cases (13" long)?

 

[Sheri]

Originally posted by cjl
How big are the mounts in this one?

Could it handle a pair of 29/360 cases (13" long)?

Yes, it has 2 stuffer tubes that go all the way to the Chute section, 34 inches in length each!!!!

 

[cjl]

VERY nice


Too many rockets...not enough money

 

[CAS2047]

Absolutely Outstanding!!!

 

[Saks_Russel]

WOW!

 

[wilsotr]

Sheri - Any possibility you would sell the engine assembly (nozzles and motor mounts) as a separate kit?

 

[Pem Tech]

Absolutely beautiful......

 

[Ltvscout]

Originally posted by V'ger
You might want to do a Honest John or a Merc/Atlas before the Scout.

She was addressing me in response to my question about who turns the aluminum for her.

 

[Sheri]

Right I was addressing LTV Scout, not that I was going to build one!

As of right now, I wont be able to sell the nozzles assembly separate as the time on the machine I use is limited and I need the ones I make for the kits. Maybe in the future I would be able to make some to sell separate.

Thanks everyone for all your kind words!!!

 

[Gus]

Sheri,

Very, very impressive.

Would you mind posting a pic of how the fins attach?

I read the description on the website but I don't get how they bolt on.

Keep up the great work,

Gus

 

[Sheri]

Originally posted by Gus
Sheri,

Very, very impressive.

Would you mind posting a pic of how the fins attach?

I read the description on the website but I don't get how they bolt on.

Keep up the great work,

Gus

Yes, the fins slide in from the bottom and attach with an L bracket to the bottom centering ring with a blind nut/bolt attachment.
Ill post a pic later.....Thanks

 

[Sheri]

Here's a pic of the fin attachment, there is a 3.0 in top section of the fin that slides onto a slot in the 2 bottom centering rings, then the L bracket bolts onto the centering ring and the fin.

 

[V'ger]

Originally posted by sheri
Here's a pic of the fin attachment, there is a 3.0 in top section of the fin that slides onto a slot in the 2 bottom centering rings, then the L bracket bolts onto the centering ring and the fin.

Sweet!

Very well thought out and engineered ... check(s) are in the mail!

Never have I spent so much and had a great feeling doing so. I have 2 LJs, 1 Sat 1b, 2 Sat Vs in the works, and now this ... well there goes my Christmas spending to myself!

V'Ger

 

[Sheri]

Originally posted by V'ger
Sweet!

Very well thought out and engineered ... check(s) are in the mail!

Never have I spent so much and had a great feeling doing so. I have 2 LJs, 1 Sat 1b, 2 Sat Vs in the works, and now this ... well there goes my Christmas spending to myself!

V'Ger

Much appreciated!!! Who better to spend it on than oneself!!!

SHeri

 

[dwmzmm]

Great idea on those clear fin placements! I was already thinking
of a similar fin placement for my PDRocketry Gemini Titan - 3 kit,
but was still scratching my head...

 

[Sheri]

Originally posted by dwmzmm
Great idea on those clear fin placements! I was already thinking
of a similar fin placement for my PDRocketry Gemini Titan - 3 kit,
but was still scratching my head...

Thanks, Ive used this method before and I like it because its clean and doesn't need any slots in the tube.

 

[Sheri]

Here's another pic of it right before launch with the fins on!

Sorry for the big pics!!! I bet those on dial up hate me now!!!
Sheri