- Joined
- Mar 27, 2009
- Messages
- 155
- Reaction score
- 7
We just added a few more Madcow Minis to our existing lineup. Also restocked the ones that we ran out of - sorry trying to keep these all in stock, but they are popular
Thinwall FG Mini kits only $30 ? Whoa... I need to find $30 in my couch cushions!
Do you offer a dual deploy option for these?
What room is there to put electronics in the nose cone?
I'm asking because it looks like even a 1 grain 29mm F motor will take them to 2000+ft and a 3 grain G would be 4500+ft, so it seems like DD would be a good idea.
Great idea - we'll get on that.
A mini Tembo XL with a 12" payload would make a nice little DD rocket.Great idea - we'll get on that.
.
A mini Tembo XL with a 12" payload would make a nice little DD rocket.
I was about to order one but they are out of 1.6"X12" tubes.
I was about to order one but they are out of 1.6"X12" tubes.
Just cut the existing tube and add a coupler.
Oops, be careful. The minis are the thin-wall fiberglass and the 1.6x12 tubes are thick-wall. It will work, but you'll have a bump between the nose cone/payload and the payload/fin can. Probably an 8" tube, 4" coupler and a bulk plate should do right? We have the coupler and bulk plate, just need to cut up some thin-wall tube. Hang on...
Enter your email address to join: