With the ever-increasing fees of maintaining our vibrant community (servers, software, domains, email), we need help.
We need more Supporting Members today.
Please invest back into this community to help spread our love and knowledge of multi-channel sound.
This is your chance to make a difference. Become a Supporting Member today:
Upgrade NowBeen working like crazy on my red 3" punisher to have it ready for the 5th for my L1 but I won't be getting my eggtimer TRS tell a day or two before the launch and someone thought it would be a good idea to steal my RMS casings. Seems like everything is against me right now. Regardless I want to be there just to watch worst case.
What casing were you planning on using? I have a 38/360 and a 38/720, along with the reload adapter system. You are welcome to borrow it for your cert if you want.
Hank!!! You still around? I'm gonna have to see if I can find your stuff. It's out in the shop somewhere. Lost in the Black Hole of Darkness. If it ever warms up, I might arm myself and go out there again. Some day. Quite frankly, I'm afraid. Very afraid. :y: .
There's a black widow out there the size of a Chevy. I think it's been eating the neighborhood pets.
Snow Ranch is ON!
I could not be more excited. Well, maybe if the orange peel was not setting in on my L3 bird. I hope I can get it cleaned up in time for the photoshoot I have scheduled with an L910 cstar!
I will have a single NAR L2 test in hand, in addition to one each for those who scheduled with me beforehand. Also I am happy to witness any L1 or L2 flight. Ask for Eric at or near the RSO table.
Snow Ranch is ON!
I could not be more excited. Well, maybe if the orange peel was not setting in on my L3 bird. I hope I can get it cleaned up in time for the photoshoot I have scheduled with an L910 cstar!
I will have a single NAR L2 test in hand, in addition to one each for those who scheduled with me beforehand. Also I am happy to witness any L1 or L2 flight. Ask for Eric at or near the RSO table.
You flying the L910 on Saturday? I'll try to get my Phantom up for some arial video, and actually keep the video files this time Let me know if you need any help with setup at the away cell.
Any chance I could borrow your PVC tracker module for my Frenzy flight?
I'm scrambling to get my Excel fin repaired after its fillets cracked at OS, lost the last two weekends to holiday travel so it's evening work this week. I'd like to get another flight or two on it before my next L2 cert attempt at the next TCC launch. I haven't done anything on the rebuild of my Firestorm 54 (Bumbl-B) yet, no way I'd have it painted in time and I don't know if I'd want to fly it with the lower-half painted and the upper half naked. But I still have my 38mm MD to fly, need to start thinking about some motors to fly in it (probably make another mile-shot), my CTI 38mm cases both have motors already loaded that were meant for the Excel, so I'll need to look for some interesting AT loads or fly the Excel to free-up one of those casings.
Yes sir!
The tracker, should be fine but I need to find time this week to replace its antenna. The module I made has a bad tendency to break them. If I do not get that far I think I know of a different transmitter you might be able to borrow, and you are certainly welcome to my receiver.
I was just thinking that we ought to schedule launches every weekend just to bring the rain and end this drought. :grin:
Thanks much! I think I may have a solution for my Eggfinder, but not totally sure, so having this option is great. My plan for the Eggfinder was to wrap it in foam, and then put it in a cut down plastic tube (the thin plastic cases CTI hardware comes in), and then secure the pod to the shock cord with tape and a kevlar leader. Think it will work? If it works for you, I'll probably wait and see at the launch and then decide what to do for tracking...
What other flights are you planning?
That sounds like it should be fine. Give it a shot!
I have a test for the new top end of my Punisher, a basic flight test for my rebuilt oblong Arreaux, and I still need to hit my Nuke Pro Max with a sledgehammer aka I540 motor.
You might be on to something...
Wanna buy a hunk of 6" a/f tubing with an av-bay on it? I'm having a blowin'-'em-out-the-door-cuz-I-kilt-that-spider-out-in-the-garage-sale. Such a deal I'll make for you!
See ya at the ranch tomorrow.
I was just thinking that we ought to schedule launches every weekend just to bring the rain and end this drought. :grin:
Enter your email address to join: