I have the following parts for an NCR/Estes Interceptor G for sale:
1) Instructions
2) Shock Cord
3) Parachute
4) Motor Tube (original NCR, so diameter is about 28.5mm)
5) Die Cut Centering Rings
6) Gorilla Shock Cord Mount Kit
7) Launch Lugs
8) Plywood Rudders
9) Plywood Wings
10) BT-60 Body Tubes (2)
11) Nose Cone/Nozzle Set (PNC-60C)
12) Wood Dowel
13) Plastic Tail Cone
14) Interceptor G Decal Sheet 1
15) Molded Plastic Parts Tree
What is missing are nose cone, airframe tube, basswood rudder filler, basswood wing filler, strakes, and Interceptor G Decal Sheet 2. I do have patterns for all the fins (rudders, wings, strakes, etc.) which I will include.
I recently built an Interceptor G from a set of most parts like the above. Here is a link to my post about it with photos:
https://www.rocketryforum.com/showthread.php?t=13237
PM me if you are interested in purchasing these. Thanks.
Greg
1) Instructions
2) Shock Cord
3) Parachute
4) Motor Tube (original NCR, so diameter is about 28.5mm)
5) Die Cut Centering Rings
6) Gorilla Shock Cord Mount Kit
7) Launch Lugs
8) Plywood Rudders
9) Plywood Wings
10) BT-60 Body Tubes (2)
11) Nose Cone/Nozzle Set (PNC-60C)
12) Wood Dowel
13) Plastic Tail Cone
14) Interceptor G Decal Sheet 1
15) Molded Plastic Parts Tree
What is missing are nose cone, airframe tube, basswood rudder filler, basswood wing filler, strakes, and Interceptor G Decal Sheet 2. I do have patterns for all the fins (rudders, wings, strakes, etc.) which I will include.
I recently built an Interceptor G from a set of most parts like the above. Here is a link to my post about it with photos:
https://www.rocketryforum.com/showthread.php?t=13237
PM me if you are interested in purchasing these. Thanks.
Greg
