Sold Fiberglass-FW Nosecones/Tubes/Fins/Centering Rings/Bulkplates + Kit

[mperegrinefalcon]

I have a bunch of fiberglass components to sell that are left over from kits I had been putting together. All bulkplates and centering rings are for Madcow tube sizes. The tubes and nosecones are from Madcow.
The first post is the nosecones and tubes, I am still sorting the other stuff. All components are new. All fiberglass is natural color.
Prices are for 1 of each item.

Nosecones w/ couplers:
1x FW 3" 5:1 thin wall ogive composite tip $45
1x FW 2.6" 5:1 thin wall ogive composite tip $40
3x FW 2.2" 5.5:1 thick wall VK composite tip $35

Tubes:
1x 3" thin wall 18" $25
1x 2.6" thin wall 15" $15
1x 2.2" thick wall 15" $15
1x 2.2" thick wall 12" $10
2x 1.1" x 8" $5

1" Switch bands:
5x 2.6" thin wall $1
1x 2.2" thick wall $1
3x 1.6" thin wall $1


Kit:
I have the parts set aside for a kit I called Hedgehog. ORK file attached for the design. All fiberglass parts are included.
FWFG kit
NC 5:1 conical thin wall with aluminum tip
Pre-Slotted
3" diameter
32" total length
29mm motor mount
8x fin design (4 small fins and 4 main fins)


Whole kit: $110

Centering Rings 3/32":
4x 3"x1.1" $4
3x 3x1.6" $4
16x 3"x2.2" $4
12x 2.6"x1.6" $3
40x 1.6"x1.1" $2

Bulkplates 3/32":
3" Diameter 1.5" Center to Center holes: $4
9x Airframe
9x Coupler

2.6" Diameter 1.3" Center to Center holes: $3
18x Airframe
16x Coupler

2.2" Diameter 1.1" Center to Center holes: $2
18x Airframe
11x Coupler
6x Airframe w/ single hole

1.6" Diameter .8" Center to Center holes: $2
14x Airframe
12x Coupler

Shipping is a flat $10 charge in the lower 48.

 

[CPUTommy]

Interested In the kit.

 

[noffie79]

I might be interested in some centering rings if you have a couple 4” with a 54mm hole

 

[CPUTommy]

Can you pm me, I'd like to build the one you designed. Thanks Tom

 

[mperegrinefalcon]

I might be interested in some centering rings if you have a couple 4” with a 54mm hole

I do not have 4" size CR, sorry! I need to get my but in gear and get that stuff listed.

 

[Jon Dubrick]

I would like 2.6 nosecone please.

 

[mperegrinefalcon]

Bump

 

[noffie79]

Bump

Any 4” CR’s with 75mm holes you might be selling?

 

[mperegrinefalcon]

Any 4” CR’s with 75mm holes you might be selling?

Nope, no 4" Cr or Bulkplates.

 

[mperegrinefalcon]

Price drop on the kit to $100.

 

[mperegrinefalcon]

Bump

 

[jbrracer]

Is that 100 shipped to the 48?

 

[mperegrinefalcon]

Is that 100 shipped to the 48?

The $10 shipping cost still applies

 

[Super]

Monica, If you have one or two "2.2 54mm couplers remaining I would like to buy them. Thank you.

Super,
TRA #8087 NAR #49538

 

[mperegrinefalcon]

Monica, If you have one or two "2.2 54mm couplers remaining I would like to buy them. Thank you.

Super,
TRA #8087 NAR #49538

I don't have couplers alone for sale and I don't want to seperate them from the nosecones.

Thanks,
Matthew

 

[mperegrinefalcon]

Bump
If it is not crossed off it is available.

 

[mperegrinefalcon]

bump

 

[mperegrinefalcon]

bump

 

[mperegrinefalcon]

bump

 

[jmacattack47]

I have a bunch of fiberglass components to sell that are left over from kits I had been putting together. All bulkplates and centering rings are for Madcow tube sizes. The tubes and nosecones are from Madcow.
The first post is the nosecones and tubes, I am still sorting the other stuff. All components are new. All fiberglass is natural color.
Prices are for 1 of each item.

Nosecones w/ couplers:
1x FW 3" 5:1 thin wall ogive composite tip $45
1x FW 2.6" 5:1 thin wall ogive composite tip $40
3x FW 2.2" 5.5:1 thick wall VK composite tip $35

Tubes:
1x 3" thin wall 18" $25
1x 2.6" thin wall 15" $15
1x 2.2" thick wall 15" $15
1x 2.2" thick wall 12" $10
2x 1.1" x 8" $5

1" Switch bands:
5x 2.6" thin wall $1
1x 2.2" thick wall $1
3x 1.6" thin wall $1


Kit:
I have the parts set aside for a kit I called Hedgehog. ORK file attached for the design. All fiberglass parts are included.
FWFG kit
NC 5:1 conical thin wall with aluminum tip
Pre-Slotted
3" diameter
32" total length
29mm motor mount
8x fin design (4 small fins and 4 main fins)
View attachment 438064

Whole kit: $110

Centering Rings 3/32":
4x 3"x1.1" $4
3x 3x1.6" $4
16x 3"x2.2" $4
12x 2.6"x1.6" $3
40x 1.6"x1.1" $2

Bulkplates 3/32":
3" Diameter 1.5" Center to Center holes: $4
9x Airframe
9x Coupler

2.6" Diameter 1.3" Center to Center holes: $3
18x Airframe
16x Coupler

2.2" Diameter 1.1" Center to Center holes: $2
18x Airframe
11x Coupler
6x Airframe w/ single hole

1.6" Diameter .8" Center to Center holes: $2
14x Airframe
12x Coupler

Shipping is a flat $10 charge in the lower 48.

 

[jmacattack47]

I’d like the 3x18” thin-wall if you still have it.