mperegrinefalcon
Well-Known Member
- Joined
- Jun 12, 2017
- Messages
- 360
- Reaction score
- 75
I have a bunch of fiberglass components to sell that are left over from kits I had been putting together. All bulkplates and centering rings are for Madcow tube sizes. The tubes and nosecones are from Madcow.
The first post is the nosecones and tubes, I am still sorting the other stuff. All components are new. All fiberglass is natural color.
Prices are for 1 of each item.
Nosecones w/ couplers:
1x FW 3" 5:1 thin wall ogive composite tip $45
1x FW 2.6" 5:1 thin wall ogive composite tip $40
3x FW 2.2" 5.5:1 thick wall VK composite tip $35
Tubes:
1x 3" thin wall 18" $25
1x 2.6" thin wall 15" $15
1x 2.2" thick wall 15" $15
1x 2.2" thick wall 12" $10
2x 1.1" x 8" $5
1" Switch bands:
5x 2.6" thin wall $1
1x 2.2" thick wall $1
3x 1.6" thin wall $1
Kit:
I have the parts set aside for a kit I called Hedgehog. ORK file attached for the design. All fiberglass parts are included.
FWFG kit
NC 5:1 conical thin wall with aluminum tip
Pre-Slotted
3" diameter
32" total length
29mm motor mount
8x fin design (4 small fins and 4 main fins)
Whole kit: $110
Centering Rings 3/32":
4x 3"x1.1" $4
3x 3x1.6" $4
16x 3"x2.2" $4
12x 2.6"x1.6" $3
40x 1.6"x1.1" $2
Bulkplates 3/32":
3" Diameter 1.5" Center to Center holes: $4
9x Airframe
9x Coupler
2.6" Diameter 1.3" Center to Center holes: $3
18x Airframe
16x Coupler
2.2" Diameter 1.1" Center to Center holes: $2
18x Airframe
11x Coupler
6x Airframe w/ single hole
1.6" Diameter .8" Center to Center holes: $2
14x Airframe
12x Coupler
Shipping is a flat $10 charge in the lower 48.
The first post is the nosecones and tubes, I am still sorting the other stuff. All components are new. All fiberglass is natural color.
Prices are for 1 of each item.
Nosecones w/ couplers:
1x FW 3" 5:1 thin wall ogive composite tip $45
3x FW 2.2" 5.5:1 thick wall VK composite tip $35
Tubes:
1x 3" thin wall 18" $25
1x 2.6" thin wall 15" $15
1x 2.2" thick wall 15" $15
1x 2.2" thick wall 12" $10
2x 1.1" x 8" $5
1" Switch bands:
5x 2.6" thin wall $1
1x 2.2" thick wall $1
3x 1.6" thin wall $1
Kit:
I have the parts set aside for a kit I called Hedgehog. ORK file attached for the design. All fiberglass parts are included.
FWFG kit
NC 5:1 conical thin wall with aluminum tip
Pre-Slotted
3" diameter
32" total length
29mm motor mount
8x fin design (4 small fins and 4 main fins)
Whole kit: $110
Centering Rings 3/32":
4x 3"x1.1" $4
3x 3x1.6" $4
16x 3"x2.2" $4
12x 2.6"x1.6" $3
40x 1.6"x1.1" $2
Bulkplates 3/32":
3" Diameter 1.5" Center to Center holes: $4
9x Airframe
9x Coupler
2.6" Diameter 1.3" Center to Center holes: $3
18x Airframe
16x Coupler
2.2" Diameter 1.1" Center to Center holes: $2
18x Airframe
11x Coupler
6x Airframe w/ single hole
1.6" Diameter .8" Center to Center holes: $2
14x Airframe
12x Coupler
Shipping is a flat $10 charge in the lower 48.
Last edited: