sheepdog
Well-Known Member
- Joined
- Jul 21, 2014
- Messages
- 56
- Reaction score
- 2
Hello Rocketeers,
I recently posted this in the watering hole, this is where I should have posted it. Just a a little trick I developed to display all my rockets from low power to high power when required.You make this using Bass wood or Balsa along
with used rocket motors. So save them when you are done launching.
Step 1 - Measure and cut Balsa or bass wood to desired size, 1X1, 2X2, Etc. depending on the size of the rocket. In this example I am using a B size motor.
Step 2 - I then mark across the corners to determine the center.
Step 3 - I apply Elmers or CA glue to the bottom of the motor and center it on the base.
Step 4 - Paint it any color you desire
Step 5 - Mount and Display your rockets......
I recently posted this in the watering hole, this is where I should have posted it. Just a a little trick I developed to display all my rockets from low power to high power when required.You make this using Bass wood or Balsa along
with used rocket motors. So save them when you are done launching.
Step 1 - Measure and cut Balsa or bass wood to desired size, 1X1, 2X2, Etc. depending on the size of the rocket. In this example I am using a B size motor.
Step 2 - I then mark across the corners to determine the center.
Step 3 - I apply Elmers or CA glue to the bottom of the motor and center it on the base.
Step 4 - Paint it any color you desire
Step 5 - Mount and Display your rockets......