waywayanda
Well-Known Member
- Joined
- Feb 10, 2010
- Messages
- 119
- Reaction score
- 0
We have in stock the first of a new line of charge wells. These charge wells are designed to minimize the footprint on your bulkheads by combining a charge well with a terminal block. These are great for smaller minimum diameter rockets as you can easily fit a 0.5g size well on a 29mm bulkhead, and two 0.5g wells are possible on a 38mm bulkhead. The kits are sold in pairs with the all the mounting hardware, and 6" wire pigtails to interface to your existing harnesses.
Every effort has been made to reduce the footprint so we have taken advantage of the small format 4-40 hardware. Yes, these are small nuts and washers,and you will likely not find the one dropped in the grass - but we have included a couple spares for those occasions.
We currently have the 0.5g size in stock and have 1.5g and a larger 2.8-3.0g size in testing. We will let you know when those are in stock.
NOTE: We now have 1.5g and 3g in stock.
Bulkhead not included.
Please check them out at www.doghouserocketry.com.
Every effort has been made to reduce the footprint so we have taken advantage of the small format 4-40 hardware. Yes, these are small nuts and washers,and you will likely not find the one dropped in the grass - but we have included a couple spares for those occasions.
We currently have the 0.5g size in stock and have 1.5g and a larger 2.8-3.0g size in testing. We will let you know when those are in stock.
NOTE: We now have 1.5g and 3g in stock.
Bulkhead not included.
Please check them out at www.doghouserocketry.com.
Last edited: