Black Start Voyager Build

[sjh1]

I didn't see another build of this model so I thought I would people a heads up.



The instructions for this model are extremely poor. I recommend that you take the time to identify all the part before starting because it is very hard to determine from the step instructions.

 

[sjh1]

It's weird but the main body tube and the engine mount are the same diameter and joined by the the engine block which more like a thick stage coupler.

View attachment 321380

 

[sjh1]

Here are the tube assemblies.
View attachment 321381 View attachment 321382

 

[sjh1]

Now working on the top part of the fin/struct assemblies. Be very careful with with the fit on there its not obvious where you need to bevel and it takes a lot of sanding to get this complicated build up to fit properly.

View attachment 321383 View attachment 321384 View attachment 321385

 

[neil_w]

There have been a couple of others (most recently, Nytrunner's), but it's good to see another. However, your images aren't working.

 

[Nytrunner]

Woo, another Blackstar!
Be sure and take your time with this thing, It demands respect.

I ended up spending a month building mine, and another doing the cosmetics. It was worth it though!
It still hasn't flown cuz I'm not sure I want to send it on a D12, but I definitely DON't want to use an E12....

 

[samb]

I didn't see another build of this model so I thought I would people a heads up.

...

If you view this place using an old fashioned pc/web brower you can scroll down and get a nice Similar Threads list:



Searching this place using a search engine rather than the forum search function almost always give better results:

The instructions for this model are extremely poor. I recommend that you take the time to identify all the part before starting because it is very hard to determine from the step instructions.
...

Yes, the Estes international hieroglyphics are quite challenging. BTW if you rotate your pictures (left, right, straighten, save) before posting they will display the way you want. I did this with MS Paint:




Sorry, I don't have any hints for mobile device users. :blush: