chadrog
Well-Known Member
- Joined
- Sep 27, 2010
- Messages
- 6,854
- Reaction score
- 22
Before I decide on whether or not to add outboards, I had to make sure I could even make the massive centering rings. I made a template, marked the center, drew a centerline, and drilled a 5/32" hole in it. I had made a simple circle cutting jig for the bandsaw, but quickly discovered a problem. Apparently the outside edge of my bandsaw table has a slight angle in it, which made the jig sit at an angle when I clamped it.
Looks like a shim between the edge of the table and the jig should take care of that easy enough.