Actually they're sittng on a contraption I just made today for when I go flying/launching. I'll post that in another thread. Back to the clones(the wife rented "Bend it like Beckham", it was actually very good).
The Goblin is from Rammakers, I think they're in Holland. The main tube came damaged, so I had to replace it. Otherwise a pretty straight forward build. It uses kevlar shock cord, a stitched nylon chute and laser cut CR's.
The Delta Star and Sky-Hi are from Rocket pad kits. The body tube marking guide was missing from the Delta Star and a stage coupler was missing from the Sky-Hi. Easily replaced, but I let them know(won them on ebay). They sent me a BT marking guide for Delta Star, but it was not the kind you wrap around the tube. It was a "static" display if you will, set the guide on a flat surface and mark the tube at the various points while holding the tube still. I just cut of about 1 1/2" of BT20 and cut a slit in it so it would act as tube coupler for the Sky-Hi. Those raelly weren't any big deals, but the decals on the Sky-Hi were not white but clear(didn't realize until after I cut them out and attamted to apply), and the black ones the ink ran when applying.
The Renegade was kit bashed sort of from a Mean Machine and help from Excelsior. I bought the decals for the Renegade and the instructions explained how to use parts from the MM. Also came with fin patterns. Here's a picture of my "real life" clone holding my Renegade.