- Joined
- Jun 27, 2012
- Messages
- 5,439
- Reaction score
- 121
With it hard to find one I decided to have a go at building my own. I used a pinicale nose cone and made a Simi scale one. This is only a plug for the mold. I know. alot of work for one nose cone but I will always have a mold for 4" tubes. I used a pinicale fiberglass cone to start with and I can remove all the bondo after I'm done. There is alot of tape under the bondo for easy removal. This will most likely be a slow build as I have beveled fins to build as well. I'm going with a 38mm motor mount and have a 29mm adapter for those motors.