RKeller
Well-Known Member
- Joined
- Jul 31, 2014
- Messages
- 1,055
- Reaction score
- 24
URRF was a blast, and to top it off I was the lucky raffle winner of a 2.6" Wildman kit! The kit being raffled was a competitor with a 38mm mount. When I picked it up Tim was kind enough to let me swap it for a Darkstar with 54mm mount! I did't get the parts pile pic, but overall I was impressed with the kit. It's been a while since I got a kit from Wildman and this all thin wall 2.6" line is pretty neat.
This kit came with 3/32 fins, so I started with my new bevel jig set to around 15 degrees. The jig uses the edge of a disk sander with the fin in a vertical position. the tilting table on the sander is what sets the angle...
This kit came with 3/32 fins, so I started with my new bevel jig set to around 15 degrees. The jig uses the edge of a disk sander with the fin in a vertical position. the tilting table on the sander is what sets the angle...