Wanted 13mm mini B, C, or D motors

[majordude]

Does anyone sell or does anyone have higher power 13mm motors (long delay preferred)?

 

[Art Upton]

Does anyone sell or does anyone have higher power 13mm motors (long delay preferred)?

Those that do have no legal way to ship them to you. I have 10mm B motors and two staged will fly 1 mile high. TO bad they don't sell those anymore.

 

[majordude]

Those that do have no legal way to ship them to you. I have 10mm B motors and two staged will fly 1 mile high. TO bad they don't sell those anymore.

I'm in SoCal if that helps. 10mm? Who made those? Czech?

 

[Art Upton]

I'm in SoCal if that helps. 10mm? Who made those? Czech?

Worst place to be , no CA permits ; Years ago Apogee under Ed not Tim made the full B motors in 10mm including the booster B2-0 and the rocket kits

 

[cwbullet]

Does anyone sell or does anyone have higher power 13mm motors (long delay preferred)?

Not made any more.

 

[majordude]

I think I had some mini C and Ds from Ed! And, back in the day, I had many mini black powder Bs from AVI.

 

[Art Upton]

AVI was in around 1975-1976 and their motors sorta worked, I liked their D and E motors as a teen at the time with FSI rockets I had...

THEN THEY ALL QUIT MAKING THEM

 

[Art Upton]

I think I had some mini C and Ds from Ed! And, back in the day, I had many mini black powder Bs from AV18mm

18mm Sure, but not 13mm

 

[Art Upton]

I think I had some mini C and Ds from Ed! And, back in the day, I had many mini black powder Bs from AVI.

They were 13mm from AVI not 10mm just to clarify ; the other Centerior company made 13mm B motors also

 

[Initiator001]

When Ed LaCroix owned Apogee the company made 13mm B7s, shorty C4 & C10 18mm and 77mm x 18mm D3 motors.

Tim Van Milligan created a line of 10.5mm (FAI standard) black powder motors in 1/2A-B performance not long after he became owner of Apogee.

All these motors have long been out of production.

PS: I seem to recall some 13mm C3/C4/C6 motors at some point too.

 

[Rocketjunkie]

Apogee, at one time, made 10.5 mm BP A and B motors. I've made 13 mm C and D motors.