Reloadable motor

madcow rocketry
SilicdyneTRF
shop deals on amazon
The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Magin

Magin

Well-Known Member
Joined
Jul 26, 2018
Messages
53
Reaction score
1
Hi folks! We are going to use reloadable motor for our rocket. That's why it has to pluggable and detachtable. We are looking for some methots about motor assembly. Here is our idea. Can u guys give me some advice or another methot for motor assembly?upload_2019-5-15_4-31-32.pngupload_2019-5-15_4-32-8.png
 
It looks like you have screws on the outside securing your centering rings, which should work fine.

It looks like you have screws on your clip holding the thrust ring against the MMT, which should also work fine.

I can't guess what the labels are meant to say.
 
dhbarr said:
It looks like you have screws on the outside securing your centering rings, which should work fine.

It looks like you have screws on your clip holding the thrust ring against the MMT, which should also work fine.

I can't guess what the labels are meant to say.
Click to expand...
Labels are just the name of the components. Thanks for your comment.
 
Come to think of it, are those 10.9 or 12.9 m6 and what's the expected load in kgf ? What motor reload?
 

Similar threads

vincarroll
Goblin (4") assembly and motor recommendation
2
Replies
32
Views
1K
RokitFlyr
RokitFlyr
Stargeezer
Need Advice on "H" Motor for Level 1 Cert
2 3
Replies
80
Views
4K
kjhambrick
K
frogglicker
L2 Punisher 3 Recovery Questions
Replies
4
Views
619
danielhv
danielhv
D
Where to find a launch controller to launch H and J motors?
Replies
21
Views
1K
dmaaero
dmaaero
M
Aerotech RMS J275W - Loose Grains Forward to Aft - This is not good right?
Replies
28
Views
1K
3stoogesrocketry
3stoogesrocketry

Latest posts

Back
Top