Just in time for the building season. We've put together a limited number of 4" fiberglass Pluto SLAM kits. There are only six available. The kits are filament wound fiberglass and canvas phenolic. This makes for great strength with a weight savings. They are not on the website and only offered here on TRF. We would like to thank you all for the tremendous amount of support we're received from the rocket community over the last 5+ years. If you would like one please PM me to make arrangements or email us @ [email protected]. $399.00
4” FWFG PLUTO/SLAM (VOUGHT)
Specifications:
Length: 64 inches
Dual Deployment
Motor Mount: 54mm
Approximate Weight: 7.1 lbs.
Will fly on I through L motors
Content of Kit:
31" x 4" booster that includes: 23” FWFG tube with 8” FWFG tail cone
10" x 4" FWFG payload tube
54mm x 18" canvas phenolic motor tube
5.5:1 conical FW fiberglass nosecone with 1/4” Kevlar bridle -- 22" exposed
(3) 3/16" canvas phenolic beveled booster fins
(3) 1/16” G10 fiberglass nosecone canards
(2) 1/16” G10 fiberglass tail cone canards
1/4" canvas phenolic fore C ring with integrated shock cord attachment system that includes 3/8" tubular Kevlar booster harness
3/16" mid C ring
1/4” canvas aft C ring with a machined step in the OD to double as a thrust plate, plus a 1/4”canvas ring for nozzle detail
10" long machined phenolic coupler/altimeter bay
Altimeter bay includes: 3/16" canvas altimeter bay bulkplates with machined step to engage coupler, (2) aluminum 1/4" all thread rods and hardware,
3 1/2" x 5 1/2" 3D printed altimeter board, forged stainless steel eye nuts and 4" x 1" switch band
General assembly instructions
4” FWFG PLUTO/SLAM (VOUGHT)
Specifications:
Length: 64 inches
Dual Deployment
Motor Mount: 54mm
Approximate Weight: 7.1 lbs.
Will fly on I through L motors
Content of Kit:
31" x 4" booster that includes: 23” FWFG tube with 8” FWFG tail cone
10" x 4" FWFG payload tube
54mm x 18" canvas phenolic motor tube
5.5:1 conical FW fiberglass nosecone with 1/4” Kevlar bridle -- 22" exposed
(3) 3/16" canvas phenolic beveled booster fins
(3) 1/16” G10 fiberglass nosecone canards
(2) 1/16” G10 fiberglass tail cone canards
1/4" canvas phenolic fore C ring with integrated shock cord attachment system that includes 3/8" tubular Kevlar booster harness
3/16" mid C ring
1/4” canvas aft C ring with a machined step in the OD to double as a thrust plate, plus a 1/4”canvas ring for nozzle detail
10" long machined phenolic coupler/altimeter bay
Altimeter bay includes: 3/16" canvas altimeter bay bulkplates with machined step to engage coupler, (2) aluminum 1/4" all thread rods and hardware,
3 1/2" x 5 1/2" 3D printed altimeter board, forged stainless steel eye nuts and 4" x 1" switch band
General assembly instructions