Random Flying Object
Well-Known Member
- Joined
- Jan 26, 2013
- Messages
- 455
- Reaction score
- 12
After building "Spikey" (my 5") L3 project I found that flying that beast on a regular basis isn't very feasible. I scaled down the design to a 54mm motor mount and have started building a 3" version of my original design. This rocket will be far less complex and much easier to prep and fly. The airframe is built with thin wall fiberglass tube from Rocketry Warehouse. Other than the interesting fin layout this should be a fairly straight forward build. The electronics will consist of: TeleMega, Easymini, a power control board, HackHD video cam, 5.8GHz video TX, and a few LiPo packs.
Sent from my iPad using Rocketry Forum
Sent from my iPad using Rocketry Forum