- Joined
- Oct 2, 2013
- Messages
- 290
- Reaction score
- 5
Here in the DFW, we have been ICED in for a couple days. I woke up this morning and deciced to make a quick (1 day) LPR build.
Build Materials: 16" x 1.3" ID tube - BT
1/8" balsa sheet - Fins
2x 1x2" 10" length balse - NC
1/4" x 36" braided Elastic - Shock Cord
Old Igniter tube - Launch Lug
Estes Motor Tube, Centering Ring, and Motor Clip purchased at HobbyTown
Started by gluing up the balsa for a nose cone. This is the first time I used end plates of plywood to hold it better in the lathe. THAT WORKED GREAT!
Build Materials: 16" x 1.3" ID tube - BT
1/8" balsa sheet - Fins
2x 1x2" 10" length balse - NC
1/4" x 36" braided Elastic - Shock Cord
Old Igniter tube - Launch Lug
Estes Motor Tube, Centering Ring, and Motor Clip purchased at HobbyTown
Started by gluing up the balsa for a nose cone. This is the first time I used end plates of plywood to hold it better in the lathe. THAT WORKED GREAT!
Last edited: