teflonrocketry1
Well-Known Member
- Joined
- Jul 31, 2011
- Messages
- 1,627
- Reaction score
- 7
Have you seen part 3 of the series of articles I wrote "Simulating Short Wide Rockets in RockSim 8, Part 3"?
https://www.apogeerockets.com/education/downloads/Newsletter162.pdf
I wrote up my techniques on simulating pyramids, cubes and saucer designs using the base drag correction for a flat plate that I developed.
Part four of the series covers simulating spool rockets. I also have two other articles I am working on, one titled "The Tail of the Boosted Dart", and the other titled "The Simulation of Long Skinny Rockets: What Barrowman Left Out Can Be Put Back In"
Bruce S. Levison, NAR #69055
https://www.apogeerockets.com/education/downloads/Newsletter162.pdf
I wrote up my techniques on simulating pyramids, cubes and saucer designs using the base drag correction for a flat plate that I developed.
Part four of the series covers simulating spool rockets. I also have two other articles I am working on, one titled "The Tail of the Boosted Dart", and the other titled "The Simulation of Long Skinny Rockets: What Barrowman Left Out Can Be Put Back In"
Bruce S. Levison, NAR #69055