kramer714
Well-Known Member
- Joined
- Jan 20, 2009
- Messages
- 1,179
- Reaction score
- 639
Heads and Tails - simple DURABLE 3D printed (almost) rocket
I wanted to do a simple really durable 3d printed rocket. Heads and Tails - 3d printed nose cone, 3d printed fin can, use off the shelf fiberglass tube for the body.
Features,
Mike
I wanted to do a simple really durable 3d printed rocket. Heads and Tails - 3d printed nose cone, 3d printed fin can, use off the shelf fiberglass tube for the body.
Features,
- 1 piece fin can for 54 mm fiberglass tube with
- integrated rail guide
- molded in bond line control (Molded in minimum bond line ribs
- mechanical bond enhancement (molded in 'glue slots)
- integrated shock cord slot
- 38mm motor tube (bonded in place)
- 2 piece Nose
- replaceable shock cord pin
- optional electronic deploy
- molded in bond line control - Ribs
- mechanical bond enhancement - glue grooves
- body tube ribs - for adjustment if needed, space between for tape if needed.
- Bond the fincan and shock cord to body tube
- bond (or drill for a screw) motor retianer
- Final drill shock cord pin hole
- press in pin with shock cord loop
- bond nose shoulder to nose.
- Fly
Mike