Eggtimer Telemetry Module

[jgarbus]

Can someone that has a telemetry module post the dimension and mounting hole locations. Its not on the web site and I am trying to laser cut a sled for a 2 stage project I am messing with.

Thanks

 

[BEC]

The board is just under 1 5/8 inches long and 3/4 of an inch wide. There are two mounting holes, centered at the ends. There is just under 1 5/16 inch between the hole centers. Or 40mm long, 19mm wide, with 36mm between hole centers. The antenna projects another 80mm from the top of the board and is 4mm in from the left edge.

 

[jgarbus]

Awesome. Thanks