I do have some stuff in the pipeline for 2016, though.
Had it on the wish list for quite some time, and once I saw the price for a Quark, I couldn't reason why someone wouldn't fly DD without a backup (since it's priced at $16). Then, somehow, the TRS Starter Set jumped into the mix, so now I have lots of presents coming :clap:
Oh, what a good boy I've been!
oint:
I assemble mine is a shallow square pyrex baking dish with white paper underneath. An angled tweezers, toothpicks, good light and head magnification is all that's needed with a cheap low wattage soldering pen.
I put the manual and all the build pictures on a laptop and have Adobe open for the instructions on one Window and the photos in a viewer in the other window. Scroll back and forth and it's a piece of cake. Haven't wrecked a build yet
until after its done! Try dropping a completed EF on the floor after it was working perfectly for 15 minutes after it was finished. Ouch! Kurt
@rhershberger very cool indeed! I'm pulling the trigger on an eggtimer BF order now, and this is indeed interesting!
This is a jig and parts catcher I made for assembling my Eggtimer products. The posts match the mounting holes for the Quark, Eggfinder LCD and Eggfinder TRS, the pins in the post top are removable, small wood screws (#2) are used if the part needs to be made immobile. Its all 6mm baltic birch plywood and 1/4" hardwood dowels.
View attachment 276984
Hmm-I thot Conner (conman)had that gig locked up? Maybe a new mercenary solder soldier for us to hire?Is there anyone willing to assemble a Quark and Tx for me? PM me.
This is a jig and parts catcher I made for assembling my Eggtimer products. The posts match the mounting holes for the Quark, Eggfinder LCD and Eggfinder TRS, the pins in the post top are removable, small wood screws (#2) are used if the part needs to be made immobile. Its all 6mm baltic birch plywood and 1/4" hardwood dowels.
Very nice Rich. You must to a lot of production for others? Not necessary though so one
shouldn't be deterred by your impressive setup. It is nice to be able to spin around the device to get the right approach to get the soldering tip in. Varies for right or left handed folks!:smile:
Kurt
Hmm-I thot Conner (conman)had that gig locked up? Maybe a new mercenary solder soldier for us to hire?
Hmm-I thot Conner (conman)had that gig locked up? Maybe a new mercenary solder soldier for us to hire?
Enter your email address to join: