etoyoc
Well-Known Member
- Joined
- Nov 23, 2012
- Messages
- 718
- Reaction score
- 0
Yes and the pitch is the 3.81mm like posted. The two pin blocks can be locked together. You don't have to get 4 pin blocks. Lock two together and push on the board and solder.
Yes, the blocks can be mounted on the topside of the board. Take into account the screw mounting option and clearance.
Ebay is where I got mine. Something like this:
https://www.ebay.com/itm/10-Pcs-300...962?pt=LH_DefaultDomain_0&hash=item5b082be772
Yes, those that are going to cram a Quark into a small space might want to do a different connection arrangement.
Kurt
If that 9mm height is accurate,it should fit. But I think I will end up printing a slightly thinner bed and with shorter standoffs. If I can shave 1.5 mm off of the bed, I should be able to make those work. They look like the standard terminal connection, I doubt I will find much shorter.