Doug Holverson
Well-Known Member
- Joined
- Jul 4, 2012
- Messages
- 655
- Reaction score
- 595
How far back do the wings mount on an Edmonds Ivee?
It looks like the tube should be BT20, provided you agree with that, what length should the tube be? I'm working a tribute scratch buildOn the plans at JimZ's there is a shadowed airfoil outline on the fuselage template.
That is where the wings mount.
http://www.spacemodeling.org/jimz/other/edmonds_ivee.pdf
It looks like the tube should be BT20, provided you agree with that, what length should the tube be? I'm working a tribute scratch build
from RocketReviews this excerptIt looks like the tube should be BT20, provided you agree with that, what length should the tube be? I'm working a tribute scratch build
Good council, thank you.from RocketReviews this excerpt
https://www.rocketreviews.com/index...search&cof=FORID:10&ie=UTF-8&q=ivee&sa=Search
Contest Craft (by Rob Edmonds ... - EMRR's Model Rocket Review
archive.rocketreviews.com › reviews › all › edm_ivee2g
The Ivee 2G kit consists of a 13mm body tube, eleven (11) laser cut balsa pieces, a balsa nose cone, a Kevlar external shock cord, and a piece of tape
BT5 is correct, thank you. Do you know the length of the tube?I'm 98% certain it's a BT-5. A B6/C6 would be way too much power for a glider this size. I had one way back in 2017 and got well over a minute on a 1/2A. Highly recommend a 1/2A3-2T for the first flight.
Thank you, I think that can be done. Cool looking rocket I've admired the Edmonds product for years. only recently decided I could afford to build some (a little late)Not a clue.
Not sure if this picture can be of help, if you scale it to known BT-5 diameter
View attachment 599217
The Ivee was unusual. Most as I recall flew great built stock. Needed little if any trimming.Thank you, I think that can be done. Cool looking rocket I've admired the Edmonds product for years. only recently decided I could afford to build some (a little late)
BT5 is correct, thank you. Do you know the length of the tube?
Enter your email address to join: