Just about to order materials for an L1 certification, specifically a 29/180 case+closures and an AeroTech H128W-14A reload. I had thought AeroTech's RDDT would be used to adjust that delay, but Sirius' webstore links that reload to the UDDT specifically & clearly:
That's a mistake, right? I realize the tool's just a spacer for a drill bit and you could probably adjust/calibrate either to work (or just use a drill bit), but my understanding is:
Thanks
Motor comes with 14-Second delay that can be adjusted. To adjust time delay, drill delay 0.025" per second of adjustment using twist drill or optional AeroTech Universal Delay Drilling Tool (UDDT).
That's a mistake, right? I realize the tool's just a spacer for a drill bit and you could probably adjust/calibrate either to work (or just use a drill bit), but my understanding is:
- The UDDT has a shorter body in order for the bit to reach the delay grain down inside the pre-assembled DMS motors.
- The RDDT has a longer body because the delay grain in the RMS/RMS+ reloads is inserted into the tool directly so only minimal length of the bit is needed.
Thanks