Need to use the AeroTech DMS UDDT to remove 5 seconds of delay instead of the standard 2s, 4s, 6s, or 8s. Can you check me please?
My thought:
Is this correct? Is there an easier way?
My thought:
Calibrate the UDDT so that the drill is 1/32" (1 second) longer than it should be. To do this: An old key card is 1/32" thick. Punch a hole in it. The "calibration adapter" sits on the key card while the drill itself sits in the hole punch,... making it hang 1/32" beyond the base of the "calibration adapter". See pics below.
Then use the 4 second side of the drill, and with the +1 second calibration offset = 5 seconds removed
Is this correct? Is there an easier way?