So I have some time on my hands and decided to get back to build only to realize...I'M DONE!
I still need to wire the electronics sled but other than that the main build is complete. I plan on doing ejection charge ground tests before I prime and paint and make it pretty but that brings up another problem. How do I seal off a 4" x 24" motor tube when I don't have any 98mm hardware? Hmmm, let me work on this one.
The final dry weight came out to be exactly 30 pounds according to my bathroom scale. I'm light about 4 pounds from my sim in OR but I do need to add epoxy and foam which will make it very close. I used about 2 1/2 pounds of rocketpoxy on the filets and centering rings and another 16 ounces of foam in the fin can. It's still at 1.49 cal in the sim fully loaded with the motor installed. Total weight at launch will be 46 pounds.
This is one big boy, thank goodness for high ceilings