Initiator001
Well-Known Member
- Joined
- Jan 18, 2009
- Messages
- 3,400
- Reaction score
- 1,112
The MPC C9 motor never went into production.Anyone have a B14, B8 or C9 they want to sell me?
The MPC C9 motor never went into production.Anyone have a B14, B8 or C9 they want to sell me?
Two 13/18 adaptators have been built. Because of the couplers between stages and the way they stack I had to build them special for each stage.
Should be able to launch all three stages at the next club launch, assuming I can find some A10T-0 motors.
View attachment 429768
Just make sure the staging couplers are not too tight, and you'll be fine.
See post #15 in this thread from some guy named John Boren.
https://www.rocketryforum.com/threa...and-dirty-staging-design.136856/#post-1630500Good luck!
That's exactly what it was in 1978. I made $1.60/hr + TIPS! Yeah, I found out that waitresses weren't always arithmeticians when it came to calculating 10%.Produced from 1970-1978.
Instructions say if you want to order engines directly from MPC, it's 3 for $1.25.
Catalog price for the kit was $3.
https://www.ninfinger.org/rockets/catalogs/MPCInsert/MPCInsert.htmlGood times.
EDIT: Of course minimum wage was something like $1.60/hr.
Enter your email address to join: