Doggonewild
Well-Known Member
- Joined
- Apr 8, 2010
- Messages
- 359
- Reaction score
- 0
I thought about how to apply pudding-like filler to the low areas, and I came up with this.
It's a maybe 3/8" wide piece of can, kinked for strength. I used it to apply filler to the low points length-wise first. After it dried a little, I used the concave part of the tool sideways to smooth it out a little more. Then I used a dampened finger for final smoothing. I was debating whether to put a coat of dope on what I had done up to this point, but I chose not to. I might have gone too far on the previous application when I used my wet finger, dope might prevent dissolving the previous layer. It worked well for a first try, I'm waiting for it to dry.
It's a maybe 3/8" wide piece of can, kinked for strength. I used it to apply filler to the low points length-wise first. After it dried a little, I used the concave part of the tool sideways to smooth it out a little more. Then I used a dampened finger for final smoothing. I was debating whether to put a coat of dope on what I had done up to this point, but I chose not to. I might have gone too far on the previous application when I used my wet finger, dope might prevent dissolving the previous layer. It worked well for a first try, I'm waiting for it to dry.