Completed motor facing end with connectors for ejection charge and airstart/separation.
The sled is 1/8 basswood with 3/16 launch lug material that fits right over the #6-32 rods.
The Raven 3 for scale. Plenty of room for a Featherweight GPS as soon as they produce an Android app!
Also just remembered I wanted to squeeze a camera in there too, might still be room to add it later on.
Earlier in the week I added the fin bracket details to the fin can but the paint came out horrible with peeling and everything; I don't even have a pic. I cut them off and will redo them.
The sled is 1/8 basswood with 3/16 launch lug material that fits right over the #6-32 rods.
The Raven 3 for scale. Plenty of room for a Featherweight GPS as soon as they produce an Android app!
Also just remembered I wanted to squeeze a camera in there too, might still be room to add it later on.
Earlier in the week I added the fin bracket details to the fin can but the paint came out horrible with peeling and everything; I don't even have a pic. I cut them off and will redo them.
Last edited: