Rosenfield Aerospace web store is now open

[J Blatz]

My good friend Bobby Rosenfield now has his webstore open. Bobby makes and sells unique nosecones and fincans in a few different sizes. Check his stuff out:

https://www.rosenfieldaerospace.com/

My favorite is the 3" Bertha style NC - https://www.rosenfieldaerospace.com..._Fit_3__LOC_Body_Tubes/p2900834_13059909.aspx

All of the NC's would be awesome for night flying.

 

[crossfire]

Are the fins on the fin can printed with the tube or are they to be glued on later??

 

[new2hpr]

Can't say that I'd trust 3-D printed stuff for structural items like shock cord anchors, or a 75mm fincan.
Nice variety of parts, though.

 

[J Blatz]

Are the fins on the fin can printed with the tube or are they to be glued on later??

One piece construction. You just glue the assembly to a body tube.

Small caveat, I do think a piece of paper or phenolic tubing added the part of the retainer being exposed to heat of motor exhaust would be a good idea.

 

[crossfire]

I have a 3D fin can from another guy who sells on this site and it works very well. My 1st 54mm fin can did get a chip out of one of the fins when it landed on a gravel parking lot. The plastic out at the very edge of the fin is thin. But I have flew it on a number of I- reloads. One other question will the fin can fit fiberglass tubes?
Thanks

 

[J Blatz]

Not sure if it will fit on fiberglass tubes or not. He has a contact link on the page, ask away.

 

[crossfire]

I will contact him. It would be nice if they would fit the light weight FG tubes.

 

[Hal8472]

Looks very nice

 

[cwbullet]

I started a build today with the LOC compatible parts.

https://www.rocketryforum.com/showt...nd-fin-can-build-thread&p=1400703#post1400703

The parts are fantastic.