Quest future launch vehicle body tube?

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

DocSeuss

Well-Known Member
Joined
Feb 16, 2023
Messages
130
Reaction score
101
Location
Lawrence, KS
I tracked down a Quest Future Launch Vehicle a while back, and the seller apparently forgot to send it to me. When she did, she put it in bubble wrap, which appears to have destroyed the main body tube and might have destroyed the smaller tubes as well. Anyone know what size they were supposed to be? I'll need to order replacements. It's such a cool looking rocket.
 
I tracked down a Quest Future Launch Vehicle a while back, and the seller apparently forgot to send it to me. When she did, she put it in bubble wrap, which appears to have destroyed the main body tube and might have destroyed the smaller tubes as well. Anyone know what size they were supposed to be? I'll need to order replacements. It's such a cool looking rocket.

Here is the ROcksim file that will also open in free Open Rocket

https://www.rocketreviews.com/rocksim-quest---future-launch-vehicle.html
 
The main tube is an 18" Quest T40 body tube.
Erockets has them:
https://www.erockets.biz/quest-body-tube-40mm-18-0-long-qst-11511/EDIT: The booster tubes look like T15, 6" long
Also available from erockets, though not that length.
Easy to cut down to correct length.
https://www.erockets.biz/quest-body-tube-15mm-10-0-long-qst-9520/
Thank you! I flew a lot of estes and pitsco about 20 years ago but I've never flown a quest rocket before so I'm super unfamiliar with their tubing. I didn't know about Rocksim and Openrocket until really recently, and the part list I saw mentioned an estes tube instead of quest so I didn't know if I was reading it wrong or they're interchangeable.

I managed to get a tomahawk that's out of round too; any idea what that tube is?
 
T40, 14.75".
Tomahawk is a fun rocket.
My buds and I had a Tomahawk cruise missile drag race a while back.
It looks awesome! I had no idea anyone had ever made one until I got back into rockets, so I snapped it up immediately but was unsure how to source tubes. Thank you!
 
Oh okay, so the Estes BT-60 tube at 18" should be fine for the main body tube, even though it's Quest? if I'm understanding that right? Sorry for the late reply.
No, an Estes BT-60 tube is not the same as a Quest T-40.
It is wider.
A Quest FLV nose cone will completely slip inside an Estes BT-60.
Be cautious about using sim files from Rocket Reviews to check parts.
The accuracy can vary.
https://www.rocketryforum.com/threa...st-egregious-failure-ive-seen-to-date.179919/
 
Back
Top